You could also make a case out of plexi glass that you can get at Axe-Man for about $8, and put all your components into that. It will eliminate sound, and will be kind of cool looking cause you can see all your internal components. Or you could build this. http://www.usfamily.net/web/drew/computer.jpg "Troy.A Johnson" wrote: > Florin, > > I think that it may be an extraordinary effort to shore up a > cheapo case. You may want to take a shot at making > your own if you go that far. ;-) Buying a newer, nicer one > would probably save much time and trouble. > > If you are short on cash and long on time, take the cover > off and push on the frame and see where it flexes (not too > hard). You might be able to screw in strips of heavier gauge > sheet metal to remove the flexibility, but be sure not to > get in the way of the cover or block air flow. If you have the > equipment available, duplicating the cover in a heavier > gauge might do the trick also. > > Good luck, > > Troy > > >>> florin at iucha.net 06/22/01 01:39PM >>> > I was actually thinking about some metal sheets... Just curious if anybody > else tried that first. > > _______________________________________________ > tclug-list mailing list > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list ------ http://USFamily.Net/info - Unlimited Internet - From $8.99/mo! ------ -------------- next part -------------- A non-text attachment was scrubbed... Name: computer.jpg Type: image/jpeg Size: 47062 bytes Desc: not available Url : http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20010622/88ad60c9/computer.jpg -------------- next part -------------- A non-text attachment was scrubbed... Name: drew.vcf Type: text/x-vcard Size: 265 bytes Desc: Card for Andrew Nemchenko Url : http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20010622/88ad60c9/drew.vcf
