Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ASCEND) MAX2000 dialout to NT-RAS with MS-CHAP

MAX2000 with E1-Interface SW: 5.0Ap36
I ve Problems to dialout to a NT-RAS Server
Radius Konfiguration:

ntserv-Out       Password = "ascend", User-Service = Dialout-Framed-User
        Ascend-Send-Auth = Send-Auth-MS-CHAP,
        Ascend-Authen-Alias = Domain\User,
        Ascend-Send-Passwd = PWD,
        Ascend-Send-Secret = PWD,
        Ascend-Dial-Number = "1234",
        Ascend-Data-Svc = Switched-64K,
        Ascend-Billing-Number = "1234",
        Framed-Protocol = PPP,
        Ascend-Metric = 2,
        Framed-Routing = None,
        Ascend-Idle-Limit = 30,
        Ascend-IF-Netmask = 255.255.255.0,
        Framed-Compression = 1,
        Ascend-Link-Compression = 1

route-2 Password = "ascend", User-Service = Dialout-Framed-User
        Framed-Route = "1.2.3.4/24   1.2.3.4   1 n ntserv-Out"


After Configure-Ack of MRU-Size and Authentication-Protocol (Chap 80)
there are only some Chap-Challenge <-> Chap Response packets.
Finally the NT-Server sends a 'Terminate-Request' packet and hangs up.

A PC with User=Doamin\User AND Password=PWD (FTP TCP/IP Stack Onnet
Version 2.0)  works !

Any Hints ??

Ralf

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
Follow-Ups: