Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Ap36 - pretty good!
At 08:44 AM 12/4/97 -0800, you wrote:
>
>Just wanted to contribute something positive :)
>
>It appears that Ap36 is a good release and I'm also happy it includes 1.140
>beta code. Upgrading was fairly easy except..
>
>I found out the hard way that if you do a SAVE CONFIG (ASCII dump) and try
>and do a RESTORE CONFIG (ASCII Text Upload), you have to be careful to
>specifiy a delay of 20 ms or longer, otherwise the stuff at the end of the
>config may not get properly recognized when doing the RESTORE. (It goes too
>fast for the Max to digest it all)
>
>The Stuff at the bottom is the important info, like how your T1's are
>configured, etc..
>
>In Hyperterminal, you can specify a delay per character or per line. I set
>them both to 20 ms, and it worked well..
>
>Other than that little thing - I'm very happy with this release and I can
>sleep nights now.. :)
>
>- Shiloh Costa
> MDI Internet Inc.
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
You really should look into using tftp to do your software upgrades. It's
way better (and easier and faster) than the way you're doing it.
Regards,
Randy
======================================================
Randy Martin Voice: (512) 485-7977
Partner eMail: randy@austintx.net
Austin Internet Access URL: http://www.austintx.net
======================================================
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: