Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) New beta software


We had no such problems.  Just tsav, tload, nvr.  Everything came back
peachy.  Been running for three days on a relatively loaded 4048 with no
hiccups whatsoever.   Beats the heck out of 33, which was throwing pages of
warnings a day.

-----Original Message-----
From: Eugene Nesterenko <eenest@quarta.net>
To: ascend-users@bungi.com <ascend-users@bungi.com>
Date: Friday, December 05, 1997 2:16 AM
Subject: Re: (ASCEND) New beta software


>Hi!
>
>> At 18:03 1997/12/03 -0800, Richard Johnsson wrote:
>> >I've tried several of the t*k.m40 files and all have errors in loading.
>> >Although the files are all over 1MB, the Max tries to load them as thin
>>
>> >The system I was trying to load is a 4002 with K56 modems (still)
running
>> >5.0ap36.
>>
>> maybe try moving to 5.0Ai13 first, then to 6.0b...
>> there may be some added intelegence there that is missing from p36?
>>
>> I had no problems loading an 1800 though,
>> straight from 5.0ap33 -> 6.0b and having no problems (so far any way)
>>
>
>Actually I've found that loading 6.0 is a two-phase process.
>First - you loading the code and get "RESTRICTED LOAD - TRY AGAIN"
>because it seems to me that they loading not all the code
>because of the restrictions and/or different load format and
>Second - you repeating the code loading and will see that the
>process (i.e. messages) is very different.
>Of course this can be done succesfully only via console
>serial cable. Looks that format of NVRAM database for parameters
>was changed from 5.0 to 6.0 so your current config will be lost.
>
>Regards,
>
>     Eugene Nesterenko
>
>------------------
>QUARTA Networks
>Tel: +7 095 234-0422
>Fax: +7 095 234-4939
>E-mail: eenest@quarta.net
>WWW: http://www.quarta.net
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>