Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Pipline 130 FR--> Cisco 2501



At 10:19 1997/12/19 -0800, Steve LaDuke wrote:
>I need to add a second PVC to my Cisco 2501 frame relay port.

>Here is my guess on what I should change it to:
>	interface Serial0
>	 no ip address
>	 encapsulation frame-relay

>	interface Serial0.2 point-to-point
>	 description Link to Tuttle & Co - Gig Harbor, WA
>	 ip unnumbered Ethernet0
>	 no ip mroute-cache
>	 no fair-queue
>	 frame-relay map ip 32.71.253.234 255.255.255.224 21 broadcast IETF

not knowing more about your frame connection provider 
or your version of IOS, its hard to say for sure...
but I do have p130 customers connected by frame, so it is possible ;^)

my frame links are 
        encapsulation frame-relay IETF
I don't know if the p130 can handle cisco's default encapsulation. ???

and in each point to point I have
        frame-relay interface-dlci [DLCI number] IETF
not sure if "frame-relay map ip" works the same way 
as "frame-relay interface-dlci" in a sub-interface.

By the way, let me know if your p130 reboots and locks up
when you reboot the cisco or put the cisco into loopback on that port.
I thought this only happend on PTP links, but if my cisco reboots while the
PVCs are up,
it kills all p130s connected to my frame link until they are power cycled.

-Jim H


----
Jim Howard             Sr Network Engineer        Lyceum Internet
jhoward@lyceum.com     http://www.lyceum.com/     404.248.1733     

My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
Fingerprint: 7E8B E2BA 1314 2535 CB08  CFF9 119B 7CD3 2488 954D

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>