Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) what happend to the wanidle interface?
We do "snmp gets" to routers to extract data for graphing bandwidth usage.
Until now, we have always used the "wanidle0" interface in the snmp
interface description.
Well I ran accross a new P130 that has no wanidle0 interface, or anything
resembleing the wan2 (T1) interface. Whats the deal?
here's a clip of an snmpwalk were it should be.....
system.sysDescr.0 = "Ascend Pipeline BRI S/N: 7365247 Software +5.0Ap1+"
system.sysObjectID.0 = OID: enterprises.529.1.3.7
system.sysUpTime.0 = Timeticks: (8422100) 23:23:41
system.sysContact.0 = ""
system.sysName.0 = "gw-cmr"
system.sysLocation.0 = ""
system.sysServices.0 = 14
interfaces.ifNumber.0 = 19
interfaces.ifTable.ifEntry.ifIndex.1 = 1
interfaces.ifTable.ifEntry.ifIndex.2 = 2
interfaces.ifTable.ifEntry.ifDescr.1 = "Console 1"
interfaces.ifTable.ifEntry.ifDescr.2 = "BRI Slot 1 Line 1"
interfaces.ifTable.ifEntry.ifType.1 = 33
interfaces.ifTable.ifEntry.ifType.2 = basicISDN(20)
interfaces.ifTable.ifEntry.ifMtu.1 = 0
interfaces.ifTable.ifEntry.ifMtu.2 = 0
interfaces.ifTable.ifEntry.ifSpeed.1 = Gauge: 9600
interfaces.ifTable.ifEntry.ifSpeed.2 = Gauge: 64000
interfaces.ifTable.ifEntry.ifPhysAddress.1 = ""
interfaces.ifTable.ifEntry.ifPhysAddress.2 = ""
interfaces.ifTable.ifEntry.ifAdminStatus.1 = up(1)
interfaces.ifTable.ifEntry.ifAdminStatus.2 = up(1)
interfaces.ifTable.ifEntry.ifOperStatus.1 = up(1)
interfaces.ifTable.ifEntry.ifOperStatus.2 = down(2)
interfaces.ifTable.ifEntry.ifLastChange.1 = Timeticks: (0) 0:00:00
interfaces.ifTable.ifEntry.ifLastChange.2 = Timeticks: (0) 0:00:00
interfaces.ifTable.ifEntry.ifInOctets.1 = 0
interfaces.ifTable.ifEntry.ifInOctets.2 = 0
interfaces.ifTable.ifEntry.ifInUcastPkts.1 = 0
interfaces.ifTable.ifEntry.ifInUcastPkts.2 = 0
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>