Guess Adtran didn't even know that? > ADTRAN > APPLICATIONS ENGINEERING > > Date: 2 December 1997 > To: Tim Connolly > Company: MountainNet, INC. > Email Address: tec@mountain.net > From: Carla White > > ADTRAN can take a AMI format T1 and convert it to B8ZS using a T1 ESF > CSU (p/n 1202025L1). We can not convert PRI signaling only T1. ADTRAN > PRI units can only accept a B8ZS PRI interfaces also. > James M Bass esquire wrote: > If you really really want to convert AMI to B8ZS, (and/or D4 to ESF), you > can get an Adtran TSU100 with a DSX card in it, and configure the network > for the AMI, and the DSX to B8ZS, and capture all of the channels to the > DSX card..... Kinda weird, but it works... > > -- > James Bass (<A HREF="mailto:james@fastrans.net">mailto:james@fastrans.net</A>) > Systems Engineer > Fastrans Logistics, Inc. > Phone: 314-429-9220 x229 > Fax: 314-426-3434 > E-mail: james@fastrans.net > For PGP Key, finger: james@fastrans.net > Or look at PGP.AI.MIT.EDU > PGP Fingerprint: DC04 B676 A0E2 F1B5 70AE 843B D47B BD3B 7584 4662 > > -----Original Message----- > From: Tim Connolly [SMTP:tec@mountain.net] > Sent: Monday, December 01, 1997 9:25 AM > To: Greg Hale > Cc: gcarden@gabn.net; ascend-users@bungi.com > Subject: Re: (ASCEND) AMI to B8ZS conversion? > > Adding to this... > We have several site with PRI's coming from the main C.O. I am told that > is the same C.O. which services this town. I guess the AMI comes into > the picture when it hits the first Microwave tower. > So is there anyway for the phone company to convert to B8ZS after > the microwave towers? Thanks for the help - Tim > > Greg Hale wrote: > > > -----Original Message----- > > From: George L. Carden III <gcarden@gabn.net> > > To: Tim Connolly <tec@mountain.net>; ascend-users@bungi.com > > <ascend-users@bungi.com> > > Date: Monday, December 01, 1997 8:20 AM > > Subject: Re: (ASCEND) AMI to B8ZS conversion? > > > > >The answer in PRI and framing is to understand that a PRI is an > > >extension to the CO however i find it hard to believe that even a end > > >user telco line is microwave to the CO. I believe that the correct > > >answer is incoming calls from some other local CO would not be routed > > >correctely because in order to get a clear channel b8zs must be used > > >and since ami is used between CO's it won't work. > > > > Actually it is a standard practice for an entire C.O. to be run > microwave, > > especially in areas where putting cable in the ground is quite expensive > as > > it would be in West Virginia. In 3rd world countries and other rural > areas > > microwaves are used extensively. They can bring up channelized T1's > between > > the offices using microwave. This microwave probably uses AMI and can't > do > > PRI. > > A switch that does BRI doesn't necessarily do PRI either. I agree that > it > > doesn't make much sense to do one without the other but our Nortel DMS-10 > > currently has the option to do BRI but PRI won't be available until late > > next year. > > > > Greg Hale > > Logan Telphone Cooperative > > > > ++ Ascend Users Mailing List ++ > > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > > -- Tim Connolly tec@mountain.net MountainNet, Inc. > -- (800) 444-1458 ext. 37 2816 Cranberry Square > -- fax (304) 594-9088 Morgantown, WV 26505 > > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > ++ Ascend Users Mailing List ++ > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> -- Tim Connolly tec@mountain.net MountainNet, Inc. -- (800) 444-1458 ext. 37 2816 Cranberry Square -- fax (304) 594-9088 Morgantown, WV 26505 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg11295.html">RE: (ASCEND) AMI to B8ZS conversion?</A></STRONG></LI> <UL> <LI><EM>From</EM>: James M Bass esquire <james@fastrans.net></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11326.html">Re: (ASCEND) Stable pipe 50 release?</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11316.html">Re: (ASCEND) filters</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11303.html">Re: (ASCEND) AMI to B8ZS conversion?</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11330.html">Re: (ASCEND) AMI to B8ZS conversion?</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11319"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd261.html#11319"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>