1. for MP 128k link, cisco to max worked in 5.0ap36. in trying to setting up multi link call from cisco to max the cisco can dial the same number twice to reach our hunt groups. 2. max to cisco does not work in 5.0ap36 due to BACP failure. when calling max to cisco, because the max can only dial one number and the user's BRI does not have a hunt group, BACP is required to get second dial number, however the BACP in MAX v5.0ap36 is NOT compatible, outbound call for second chan. only works in MAX 6.0b. (setting up a hunt group should remedy this) 3. max to cisco does not work in 6.0b due to MP failure, the max does see the second phone number and dials correctly, but never adds the second call to the MP bundle, the cisco sees repeated timeouts of MP negotiation. 4. cisco to max test in 6.0b was inconclusive and rather irritating, it did work a handful of times, but most failed to build MP bundle the same as max to cisco calls (item #3). I spent over 4 hours on the phone with a cisco engineer. as this is their first release for the 760 to support BACP, he was also quite interested in finding a working configuration. as a side note, 128k MPP to a pipeline seemed to work fine, as does analog MP from a Windows 98 client, with one 33.6 and one 56k modem. -Jim H ---- Jim Howard Sr Network Engineer Lyceum Internet jhoward@lyceum.com <A HREF="http://www.lyceum.com/">http://www.lyceum.com/</A> 404.248.1733 My PGP Public Key: <A HREF="http://www.lyceum.com/~jhoward/pgp-key.txt">http://www.lyceum.com/~jhoward/pgp-key.txt</A> Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11681.html">Re: (ASCEND) P75 to dial 2 #s for 1 MPP session</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11679.html">(ASCEND) dial *out* with Max1800 k56 modems -- not 8 bit clean ?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11743.html">Re: (ASCEND) dial *out* with Max1800 k56 modems -- not 8 bit clean ?</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11683.html">(ASCEND) dial *out* with Max1800 k56 modems -- not 8 bit clean ? (fwd)</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail3.html#11680"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd277.html#11680"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>