This box has a mix of ISDN calls and modem calls. I have about a dozen local profiles on the box. About 5 of them are bidirectional (we call them and they can call us). Right after upgrading to 5.0Ap36, I am unable to dial out to the ISDN customers, but they can dial into us just fine! When the dialout occurs, it shows the connection was terminated and the message window shows "No Connection Cause Code 044" over and over for each dial attempt. At first I thought it was a telco problem (GTE in my case), but they have checked things over and say that dialout should work and that they haven't touched anything. Given the sequence of events, I believe them. The three PRI going into this box are from a DMS100, the first 2 are NFAS and have all the modem calls, and the last is FAS and has all the ISDN calls. Has anyone seen this? Which release did it start happening in? Is it fixed in p38? One weird thing that happened: I was trying to track it down with one customer and I had them reset both send and receive to the same thing. Then I tried to dial them and it still didn't work but I didn't get the cause code 044. The customer looked in his Netopia's log and it showed a PAP error saying that the username I was using didn't match his. Sure enough, the customer had somehow changed the username I was supposed to come in as to something else. After I had him change it back to the correct string, the calls started to fail with cause code 044 again. This indicates to me that the MAX is actually getting out enough to send the username (at least when the username isn't right :) so this further indicates that it isn't a telco problem and more a firmware issue. Any help is much appreciated. I am going to call Ascend tech support first thing tomorrow, but I wanted to check with the list since I figure that someone else might have seen this already. ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11821.html">Re: (ASCEND) Centrex Calls with 5.0Ap36 (Private/Public Flags)</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11818.html">Re: (ASCEND) Re: NFAS?</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11828.html">Re: (ASCEND) Recommendations for a new router...</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11820.html">(ASCEND) Re: TNT 672 modems, DS3 Channelized</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11829"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd283.html#11829"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>