We do "snmp gets" to routers to extract data for graphing bandwidth usage. Until now, we have always used the "wanidle0" interface in the snmp interface description. Well I ran accross a new P130 that has no wanidle0 interface, or anything resembleing the wan2 (T1) interface. Whats the deal? here's a clip of an snmpwalk were it should be..... system.sysDescr.0 = "Ascend Pipeline BRI S/N: 7365247 Software +5.0Ap1+" system.sysObjectID.0 = OID: enterprises.529.1.3.7 system.sysUpTime.0 = Timeticks: (8422100) 23:23:41 system.sysContact.0 = "" system.sysName.0 = "gw-cmr" system.sysLocation.0 = "" system.sysServices.0 = 14 interfaces.ifNumber.0 = 19 interfaces.ifTable.ifEntry.ifIndex.1 = 1 interfaces.ifTable.ifEntry.ifIndex.2 = 2 interfaces.ifTable.ifEntry.ifDescr.1 = "Console 1" interfaces.ifTable.ifEntry.ifDescr.2 = "BRI Slot 1 Line 1" interfaces.ifTable.ifEntry.ifType.1 = 33 interfaces.ifTable.ifEntry.ifType.2 = basicISDN(20) interfaces.ifTable.ifEntry.ifMtu.1 = 0 interfaces.ifTable.ifEntry.ifMtu.2 = 0 interfaces.ifTable.ifEntry.ifSpeed.1 = Gauge: 9600 interfaces.ifTable.ifEntry.ifSpeed.2 = Gauge: 64000 interfaces.ifTable.ifEntry.ifPhysAddress.1 = "" interfaces.ifTable.ifEntry.ifPhysAddress.2 = "" interfaces.ifTable.ifEntry.ifAdminStatus.1 = up(1) interfaces.ifTable.ifEntry.ifAdminStatus.2 = up(1) interfaces.ifTable.ifEntry.ifOperStatus.1 = up(1) interfaces.ifTable.ifEntry.ifOperStatus.2 = down(2) interfaces.ifTable.ifEntry.ifLastChange.1 = Timeticks: (0) 0:00:00 interfaces.ifTable.ifEntry.ifLastChange.2 = Timeticks: (0) 0:00:00 interfaces.ifTable.ifEntry.ifInOctets.1 = 0 interfaces.ifTable.ifEntry.ifInOctets.2 = 0 interfaces.ifTable.ifEntry.ifInUcastPkts.1 = 0 interfaces.ifTable.ifEntry.ifInUcastPkts.2 = 0 ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg11938.html">Re: (ASCEND) ATM MTU 64 KB ?</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg11936.html">(ASCEND) Firmware version V1.160T</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg11936.html">(ASCEND) Firmware version V1.160T</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg11931.html">(ASCEND) Max VS PM3 Connect Speeds</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="maillist.html#11932"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd287.html#11932"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>