Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) P25 failures
At 11:18 AM 6/20/97 -0700, William Bauer wrote:
>Does anyone know what causes the error:
>
> Power-On
> Self Test
> Halted.
>CONFIGURE UNIT!
>
>I've had two P25s fail with this error, and nothing restores it, including an
>nvramclear. Is there something on the ISDN or ethernet side of the
connection
>that could cause this kind of failure? Bad ethernet port on a computer, or
>stray signals coming from the Pac Bell end of the cables?
This was a problem that plagued the P25 quite a few months (year?) ago, and
all
of the batch that were known to have the problem were recalled. Is it
possible
that you have one of that batch ? i.e. quite an old serial number ?
The cause otherwise is not known, effectively what has happened is that the
unit's serial number and unit ID has been deleted or lost from FLASH -
something
that should never happen even with software changes, option updates, flash
downloads - never.
I would highly recommend that we get the unit RMA'd so that Ascend can
attempt to
diagnose the cause of the failure.
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
References: