Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Callback Problem
Hello!
I have the same problems. Callback seems to be broken in all 5.0(i|A)x
releases. I reported this several times to Ascend directly and to our
distributor. But there is still no solution :-(
The problem is always that the MAX (1800|4000) does not drop the outgoing
call before the callback of the remote router comes in, which then results
in a LAN security error. I tried this with a Pipeline 50 and also other
routers at remote side.
Probably this problem exists only with Switch Type (U.K./NET 3/NET 5) or
what is the reason for that this very basic feature is still not working?
Michael Seyfried
At 14:26 28.06.97 +0200, you wrote:
>Hi !
>
>I have a Callback-Problem between a Max 4000 (connected to
>a S2M-Multiplexer from German Telekom) and
>a Pipeline 50 (connected to a DSS1-ISDN-S0).
>
>When the Max calls the Pipe, the Pipe gets the Phone-Number
>via CLID and then refuses the call correctly.
>The ISDN-Line drops on the Pipe-Side and the callback
>will then be initiated.
>
>But the Max is still 'seeing' this line
>for 15 seconds. So the callback could not be
>serviced by the Max because the subnet for the Pipe is
>still routed to the outgoing call.
>
>The installed software is 5.0Ap5 on the Max 4000 and
>5.0Ap8 on the Pipeline 50.
>
>Any ideas ?
>
>bye...
>
>Markus Froehlich
----------------------------------------------------------------
BLITZ Datentechnik GmbH, Nebingerhof 5, D-96047 Bamberg, Germany
Tel: +49/951/9685163, Fax: +49/951/9685164, http://www.blitz.net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups: