Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(ASCEND) 5.0Ai13


5.0Ai13 has been given to support.  This release contains the following new
features and corrections:

New features in the MAX release:

*  RADVision extensions to V.25bis for DNIS
*  Personal Handy Phone Service (PHS) support (Japan only)
*  Limiting terminal server access per user
*  SNMP request authentication added
*  MAX returns to primary RADIUS server after timeout
*  Loopback support for IDSL card
*  Channel selection when MP+ or BACP adds bandwidth
*  RADIUS Accounting ATMP Notification
*  SNMP can help find which device a call is logged into
*  Firewall enhancements for the next release of SAM (Secure 
      Access Manager)
*  Configure port for Syslog messages
*  USR Courier V.Everything modem available with MAX 200Plus
*  Megahertz CC1336 and XJ1336 modems available with MAX 200Plus
*  Call logging feature
*  SNMP write security disabled by default
*  TFTP checks for compatibility of downloaded files
*  RADIUS now reports modem transmission rate


Problems corrected in the MAX release:

TR 1783      RADIUS: CLID with dynamic IP and callback didn’t work. 
TR 2028      MAX 4000: Under heavy load, calls were not connecting
                 completely. 
TR 2092      MAX 2000: Boot hung with V110 card installed. 
TR 2096      MAX 4000: Poisoning of dial-out routes didn’t work correctly. 
TR 2100      FR MTU/MRU calculation caused fragmentation problems. 
TR 2154      MAX 4000 using ARA reset - Fatal Error 2. 
TR 250008    Using MAXDial, M4000 used SPEECH Bearer Service for outgoing
                 modem calls. 
TR 250026    ELSA Microlink x.75 TA session was disconnected and hung. 
TR 250038    MAX 4000 reset - Fatal Error 2.



New features in the Pipeline release:

*  Add basic IP Security functionality to the router
*  SNMP request authentication added
*  SNMP can help find which device a call is logged into
*  Firewall enhancements for the next release of SAM (Secure Access Manager)
*  NAT for LAN feature allows IP addresses below 100.100.100.100
*  Configure port for Syslog messages
*  Spoof Adr parameter allows any subnet address and mask
*  SNMP write security disabled by default
*  TFTP checks for compatibility of downloaded files


Problems corrected in the Pipeline release:

TR 1848  P130 using Frame Relay, ISDN backup not triggered by IPX traffic. 56
TR 2015  P130 UBRI L56 Nailed group changed to 3 after tloadcode.

-- Patti


Kevin Smith                              Updated Service and Support
Ascend Communications                    Resources are now at:
                                         http://www.ascend.com/service
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups: