Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) P130 and T1 config...



At 11:25 PM 6/11/97 -0700, Mark Strother wrote:
>Hi,
>
>If this is a stupid question I apologize in advance. But I have recently
>purchased two P130's with 5.0A software. I'm attempting to connect
>two offices over a T1 line. 
>
>My problem is the manuals aren't the greatest, I can't find anything
>useful on the ascend web site and I haven't done this before.
>
>Both units connect, if I use either encaps = MPP or FR. But they seem to
>be connecting at 64K at least when I type show IF stats it shows 64K.
>When I'm in MPP mode, the status window shows 1536K 24 channels. But it
>doesn't appear as though all those channels are in use.
>
>Basically my questions are... how should I set ENCAPS ? When I have all
>24 channels nailed should show IF stats show the proper bandwidth not
>just 64000? I would think so. It also shows the link as a PPP link but
>shouldn't it be something else?
>
>Any help or suggestions would be great. 

On a nailed T1 line, the encaps should be PPP.


Matt Holdrege  -  http://www.ascend.com  -  matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>


Follow-Ups: References: