Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Callback Problem



Hi,
you should use 5.0Ai13 on the Pipe50.
Set in the P50:
ConnectionProfile....TelcoOptions:
Callback=yes
Expect Callback=no
Data-Svc=64K

in the MAX:
Callback=no
Expect Callback=yes
Data-Sv=64K


then this WILL WORK....

BTW, there is also a German Usergroup

send subscribe to: ascend-users-DE@uni-hannover.de


Regards

Christof Rohlaender



At 02:26 PM 6/28/97 +0200, Markus Froehlich wrote:
>Hi !
>
>I have a Callback-Problem between a Max 4000 (connected to
>a S2M-Multiplexer from German Telekom) and
>a Pipeline 50 (connected to a DSS1-ISDN-S0).
>
>When the Max calls the Pipe, the Pipe gets the Phone-Number
>via CLID and then refuses the call correctly.
>The ISDN-Line drops on the Pipe-Side and the callback
>will then be initiated.
>
>But the Max is still 'seeing' this line
>for 15 seconds. So the callback could not be
>serviced by the Max because the subnet for the Pipe is
>still routed to the outgoing call.
>
>The installed software is 5.0Ap5 on the Max 4000 and
>5.0Ap8 on the Pipeline 50.
>
>Any ideas ?
>
>bye...
>
>Markus Froehlich
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
>or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>