Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Cisco / MAX4000 callback ?



i see your dialoutnumber "Ascend-Dial-Number" starts with a "0"
dont u use trunk-groups for dialing from the max??

i thought you allways need trunk-groups for dialing :-/

maybe you want to try the trunks??

thats what we do (of course not to a cisco ;) for call-back!

and it mainly works
----------------------------------------------------------------------------

Kamil Ince
SNI CC IT Networks, GS Koeln
mail: ince@rw.sni.de, tel: +49 221 679-2173, fax: -1995
It may be my fault, but it's not my problem 

----------
> From: Pierre-Yves Kerembellec <Pierre-Yves.Kerembellec@vtcom.fr>
> To: ascend-users@max.bungi.com; support@ascend.com
> Subject: (ASCEND) Cisco / MAX4000 callback ?
> Date: Dienstag, 20. Mai 1997 18:08
> 
> Hi !
> 
> I'm trying to get the following connection working :
> 
> 1) a Cisco 2003 call a MAX4000, and successfully passes 
>    CHAP authentication (I use a 'ppp authentication chap callin'
>    at the Cisco side ...)
>    
> 2) the MAX4000 hang-up, then callback the configured number
> 
> 3) the Cisco answers the call and re-authenticate using CHAP
>    again
>   
> Phase 1 works fine
> Phase 2 does not happen, because the MAX _NEVER_ terminates the call !
> 
> I've got the following RADIUS profile :
> 
> thecisconame     Password = "thepassword"
>         User-Service = Framed-User,
>         Framed-Protocol = PPP,
>         Framed-Address = 193.XXX.XXX.14,
>         Framed-Netmask = 255.255.255.248,
>         Ascend-Idle-Limit = 900,
>         Ascend-Callback = Callback-Yes,
>         Ascend-Send-Auth = Send-Auth-PAP,
>         Ascend-Send-Passwd = "thepassword",
>         Ascend-Dial-Number = "014612XXXX",
>         Ascend-Data-Svc = Switched-64K
> 
> Why does my MAX never callback the Cisco ?
> What sofware image do I need to support callback ?
> (currently running 5.0Ap7, eim.m40)
> How can I test that the MAX4000 is able to dialout ?
> (used 'test #number' under TermServ, but this failed)
> Do you have some profile examples that works ?
> 
> NB: I cannot use CLID authentication since the Cisco won't
> validate callback until fully authenticated wia PAP or CHAP
> to the other end ...
> 
> NB2: if I don't use the callback feature, all goes like a charm !
> (I mean, the Cisco perfectly connect to the MAX4000, and correctly 
> aggregate the second B channel when needed)
> 
> Please, help me, I'm getting crazy about that !!! ;-)
> Pierre-Yves
> 
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> Pierre-Yves KEREMBELLEC         Phone # +33 1 46 12 67 50
> VTCOM                           Fax   # +33 1 46 12 67 00
> 40, rue Gabriel Crie            E-mail  pyk@vtcom.fr
> 92245 Malakoff Cedex, France    Systemes et Reseaux
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
> or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>


Follow-Ups: