Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) P75, 5.0Ai10 won't stick?



At 03:26 PM 5/20/97 -0500, Danny Williams wrote:
>Hmm... I've done this before, and had no trouble. This time, however, 
>I *am* having trouble. This box is brand new and came with 4.6C. I 
>loaded 5.0ai10 after doing an FCLEAR and NVRAMCLEAR, but it still 
>said 4.6C in the Sys Option box. I tried updating it to the 5.0Ap3 I 
>have running on another P75 and it went in just fine - 5.0ap3 is 
>reported in the Sys Option box. I pulled the b.p75 for 5.0ai10 from 
>the web site again, just to make sure I got the right one, and 
>uploaded it to the new P75. After the upload it still said 5.0ap3! 
>What's going on here?!

That's a good question - since I uploaded both b.p75 and ba.p75 into
my home P75 without any problems.....are you using TFTP or the console
method?

..aha...I bet this is the console method right? The load is too big to
use that method - so you need to use TFTP. I always do, so it never
occurred to me to check and verify that we have the right README
information out there.

Please confirm/deny this so I can have the ftp-admin update the
README with this warning.


Kevin Smith                              Updated Service and Support
Ascend Communications                    Resources are now at:
                                         http://www.ascend.com/service
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>


Follow-Ups: References: