Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) P75, 5.0Ai10 won't stick?



On Tue, 20 May 1997, Kevin Smith wrote:

> >reported in the Sys Option box. I pulled the b.p75 for 5.0ai10 from 
> >the web site again, just to make sure I got the right one, and 
> >uploaded it to the new P75. After the upload it still said 5.0ap3! 
> >What's going on here?!
> 
> ..aha...I bet this is the console method right? The load is too big to
> use that method - so you need to use TFTP. I always do, so it never
> occurred to me to check and verify that we have the right README
> information out there.
> 

For me, the same thing happened when trying to upgrade may MAX200+ from 
4.6C (as shipped) to 5.0A. I had to try several times, but I DID use tftp.
After much trying, I managed to eat the 5.0Ap7, but I didn't get to eat 
it the actual incremental release (one time the MAX200+ sayd something 
about "not enough memory" or what).

I think the bigger the release code the more problems I had.

Strange, uh?

Elmar

----------------------------------------------------------------------
Elmar Haag             CENTAUR COMMUNICATION           Urbanstrasse 68
haag@centaur.de         Xlink PoP Heilbronn            74074 Heilbronn
http://www.centaur.de   Tel +49 7131 799 258     Fax +49 7131 799 260



++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>


References: