Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Re: ascend-users-digest V96 #630
- To: ascend-users@max.bungi.com
- Subject: (ASCEND) Re: ascend-users-digest V96 #630
- From: "Torsten Droste" <td@cd-ware.de>
- Date: Fri, 23 May 1997 08:35:30 +0100
- Comments: Authenticated sender is <td@inc-mail.cd-ware.de>
- In-reply-to: <199705222229.PAA04410@max.bungi.com>
- Organization: INC InterNet Connectivity GmbH
- Priority: normal
- Sender: owner-ascend-users@max.bungi.com
> Date: Thu, 22 May 1997 15:29:33 -0700
> From: owner-ascend-users-digest@max.bungi.com
> To: ascend-users-digest@max.bungi.com
> Subject: ascend-users-digest V96 #630
> Reply-to: ascend-users@max.bungi.com
> From: Elmar Haag <haag@centaur.de>
> Date: Thu, 22 May 1997 23:03:39 +0200 (MEST)
> Subject: Re: Re[2]: (ASCEND) Fw: Cisco / MAX4000 callback ?
>
> On Wed, 21 May 1997, Pierre-Yves Kerembellec wrote:
>
> > > You cannot try it for a RADIUS profile. Do this: create a MAX connection
> > > profile , Name="test", Dial="014612XXXX", enable IP routing and the hole
> > > stuff involved with it. Save the profile. Enter the profile again. Press
> > > Ctrl-D so you get the DO menu. In actual releases (5.0Ap7 for example)
> > > you get a menu entr "2...dial". So press 2 and watch the log. It should read:
> > > "Ougoing call to 014612xxxx. ... Connected, assigned to port bla bla bla.
> > > LAN session up, test".
> >
> > It does not work ... I never get the '2...dial' prompt ...
>
Choose the "full acess" security profile and you'll see the
2...dial.
Torsten
----------------------------------------------------------
Torsten Droste td@pop-stuttgart.net
Internet PoP Stuttgart IPF.NET phone: +49 711 6574500
INC InterNet Connectivity GmbH fax: +49 711 6574501
Schenkendorfstr. 17 70193 Stuttgart
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>