Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Cannot Hangup/Always Busy (Re: (ASCEND) Pipeline 75 dying?)
At 07:10 PM 10/6/97 -0700, rj wrote:
>Matt Holdrege wrote:
>> At 08:39 PM 10/6/97 -0400, Edwin Yeh wrote:
>> >I had a new P75 (S/N: 72xxxx) and I seemed to have the same problem.
>> >In fact, even if I force it to Hang Up via CTRL-D. It will dial
>> >right back to the ISP.
>> >>1) The unit just plain refuses to idle hang up anymore, I have idle
>> >>setup at 180 and it used to work perfectly until about a month ago, now
>> >>it will not log itself off, period.
>> >
>> >I thought it was due to the recent installation of "IE4.0" with Active
>> >Desktop. I was speculating that somehow the workstations were
>> >sending packets with outbound addresses and therefore causing
>> >the connection to be persistent. If this was so, perhaps, there's
>> >a way to "FILTER" out those packets? Anyone know what "broadcasting"
>> >packets, IE4.0 is sending every 10 seconds or so?
>>
>> My method is to turn off all Microsoft protocols in the NT or W95 network
>> setup. I only have TCP/IP enabled.
>>
>> However, if you must have Netbeui, IPX or Netbios you can find out through
>> debug or a packet sniffer what packet is keeping the line up and set a call
>> filter for it.
>>
>> Matt Holdrege - http://www.ascend.com - matt@ascend.com
>
>Well, I checked, and I only have TCP/IP enabled. I have NOT installed
>IE 4.0 (I hate IE) and I have not changed anything, in fact I am 100%
>positive this non-hanging up problem started back when I was still using
>5.0 ... Anyone have any ideas? Having to telnet to the Pipe and
>manually hang up everytime is getting REAL old.
>
>Bob
Edwin/Matt/Bob...er....which OS are you running NT 4.0 ? You don't say, unless
you were an un-quoted earlier part of this thread ?
I run both Win95 an NT4.0 machines on my home net. Behind a P75 now running
5.1A.
I do not have any problems with the Pipeline bringing up the line when it
should not, or failing to when it should. I even run NAT to throw another
complexity at it.
Maybe we could compare workstation configurations ? I have no filters
enabled on
the P75 *at all*.
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: