Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) RADIUS IP pools: Adding second MAX

Hi all,

I could very well be wrong, since I don't usually assign IP's through
RADIUS across multiple MAX's, but I thought that this could be done the
way Del has it, by setting Ethernet->ModConfig->Ether Options->Proxy
Mode=Active, and running RIP so that the boxes know who is handling the
route.   

I'm wondering if Ethernet->ModConfig->WAN options->Pool Only=No needs to
be set.  Any ideas, or corrections would be appreciated.

Alex P

On Tue, 14 Oct 1997, Jason Nealis wrote:

> 
> 
> On Mon, 13 Oct 1997, Del wrote:
> 
> > I'm adding a second MAX to my network and I need to know how to use my
> > RADIUS IP Pool assignments with both MAXes.
> > 
> > I have already added the second MAX to my clients file.
> > 
> > Below, I have included what I believe will work in the users file.  It
> > works fine with just the one MAX hooked up.  The telco will be running my
> > new lines Thursday and I'd like to be prepared.
> > 
> 
> 
> 
> > --------------------------------------------
> > 
> > pools-max01     Password = "ascend", User-Service = Dialout-Framed-User
> >         Ascend-IP-Pool-Definition = "1 208.15.109.133 100"
> > 
> > pools-max02     Password = "ascend", User-Service = Dialout-Framed-User
> >         Ascend-IP-Pool-Definition = "1 208.15.109.133 100
> > 
> 
> 
>  You need to define seperate wan pools for each box, If you don't 
> get ready for you tech-support que to blow up. :)
> 
> Jason Nealis
> 
> 
> 
> > 
> > DEFAULT Password="UNIX"
> >         User-Service=Framed-User,
> >         Framed-Protocol=PPP,
> >         Ascend-Assign-IP-Pool=1,
> >         Framed-Netmask=255.255.255.255,
> >         Framed-Routing=None,
> >         Ascend-Idle-Limit=2700
> > 
> > _________________________________________________
> > 
> > 
> > Should that work?
> > 
> > Thanks once again,
> > 
> > Del Hines
> > 
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: