Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) RADIUS IP pools: Adding second MAX
On Mon, 13 Oct 1997, Del wrote:
> I'm adding a second MAX to my network and I need to know how to use my
> RADIUS IP Pool assignments with both MAXes.
>
> I have already added the second MAX to my clients file.
>
> Below, I have included what I believe will work in the users file. It
> works fine with just the one MAX hooked up. The telco will be running my
> new lines Thursday and I'd like to be prepared.
>
> --------------------------------------------
>
> pools-max01 Password = "ascend", User-Service = Dialout-Framed-User
> Ascend-IP-Pool-Definition = "1 208.15.109.133 100"
>
> pools-max02 Password = "ascend", User-Service = Dialout-Framed-User
> Ascend-IP-Pool-Definition = "1 208.15.109.133 100
>
You need to define seperate wan pools for each box, If you don't
get ready for you tech-support que to blow up. :)
Jason Nealis
>
> DEFAULT Password="UNIX"
> User-Service=Framed-User,
> Framed-Protocol=PPP,
> Ascend-Assign-IP-Pool=1,
> Framed-Netmask=255.255.255.255,
> Framed-Routing=None,
> Ascend-Idle-Limit=2700
>
> _________________________________________________
>
>
> Should that work?
>
> Thanks once again,
>
> Del Hines
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: