East County Internet Services, Inc -Jess- CFO System Admin On Tue, 7 Oct 1997, Kevin Smith wrote: > Now we have at least 2 threads on this subject.....did we get routing table > info from the MAXen when this "failure" occurs ? > > At 07:34 AM 10/7/97 -0700, Jesse Martinez wrote: > >I'm runing OSPF with rip turned off. > > > > > >East County Internet Services, Inc > >-Jess- > >CFO > >System Admin > > > >On Mon, 6 Oct 1997, Kevin Smith wrote: > > > >> You didn't mention if you are using a routing protocol here to handle the > >> dynamic updates that would be required to do this ? > >> > >> At 07:51 PM 10/6/97 -0700, Jesse Martinez wrote: > >> >I have only one static route. The default route that points to my router. > >> >Both maxes point to the same router. I heard something about an attribute > >> >called ascend-if-address but when I tried that the p50 wouldn't route at > >> >all. Any other suggestions. > >> > > >> > > >> >East County Internet Services, Inc > >> >-Jess- > >> >CFO > >> >System Admin > >> > > >> >On Mon, 6 Oct 1997, Kevin Smith wrote: > >> > > >> >> At 12:00 PM 10/4/97 -0700, Jesse Martinez wrote: > >> >> >I have a user with a Pipeline 50. Not sure the rev of software he > has. My > >> >> >question is how do I set up radius to allow him to connect to either of > >> >> >two maxes and route without problems. I gave him a subnet of 248 to use > >> >> >and when he connect to the first max in a hunt group he's ok. If the > call > >> >> >hits the second max then he can't route. I've never configured a p50 so > >> >> >I'm not sure of the settings on his side. Both maxes are in the same > hunt > >> >> >group. > >> >> > >> >> Whichever MAX picks up the RADIUS entry should start advertising the > >> route to > >> >> the P50 via a routing protocol (RIPv2 or OSPF). Do you have static > routes > >> >> setup that could be over-riding this ? > >> >> > >> >> > >> >> Kevin > >> >> > >> >> > >> >> ++ Ascend Users Mailing List ++ > >> >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >> >> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > >> >> > >> > > >> >++ Ascend Users Mailing List ++ > >> >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >> >To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > >> > > >> > >> Kevin > >> > >> > >> ++ Ascend Users Mailing List ++ > >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > >> > > > >++ Ascend Users Mailing List ++ > >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com > >To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > > > > Kevin > > > ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <!--X-Follow-Ups-End--> <!--X-References--> <HR> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg09483.html">Re: (ASCEND) P50</A></STRONG></LI> <UL> <LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg09501.html">(ASCEND) FS: Ascend Pipeline 50</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg09499.html">Re: (ASCEND) Re: NetBios Filters</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg09483.html">Re: (ASCEND) P50</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg09495.html">RE: (ASCEND) P50</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail21.html#09500"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd193.html#09500"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>