Hi, we have an ISDN user with a P75, dialling in to our MAX 4000
Load: eb.m40 Revision: 5.0Ap13.
I don't know that much about p75s ... When he dials in we see
64k MP -> 64k PPP -> disconnect with code 47. It's getting his
username ok and presumably password is ok. Code 47 is what we see
when a DUN user has no tcp/ip installed (the code translates as
"Closing LCP because no NCPs were opened")
We have MP and MPP turned off here ... he's dialling in to a single
MAX ... He's got NAT turned off - we're planning to enable it when we can
get the conection up)
Can anyone can give me even half a clue as to why this is happening ?
His P75 is as follows (sorry for excess detail, but I'm not sure exactly what's
relevant ...)
P75-1SBRI load b.p75 version 5.0A
connection nwnet:
Active=Yes
Encaps=PPP
Dial #= (our ISDN number)
Calling #=
Called #=
Route IP=Yes
Route IPX=N/A
Bridge=N/A
Dial Brdcast=N/A
(nwnet) Encaps Options:
Send Auth=PAP <-- this is correct
Send PW=*******
Recv PW=N/A
MRU=1524
LQM=No
LQM Min=600
LQM Max=600
Link Comp=None
VJ Com=No
Ip Options:
LAN Adrs=0.0.0.0/0
WAN Alias=0.0.0.0
IF Adrs=0.0.0.0/0
Preference=100
Metric=7
Private=No
RIP=Off
[...]
IPX Options all = N/A
Session Options
Data Filter=0
Call Filter=0
Filter Persistence=No
Idle=15
Preempt=60
IPX SAP Filter=0
Backup=
Secondary=
Telco options...
AnsOrig=Ans Only
Callback=No
Exp Callback=No
Call Type=Switched
Group=N/A
FT1 Caller=N/A
Data Svc=64K
Force 56=No
Bill #=
Transit #=
Answer -> PPP Options
Route IP=Yes
Route IPX=N/A
Bridge=N/A
Recv Auth=NONE
MRU=1524
LQM=No
LQM Min=600
LQM Max=600
Link Comp=None
VJ Comp=No
BACP=No
Dyn Alg=Quadratic <<-- seems to indicate mpp is turned on somewhere ..?
[...]
Configure ...
Switch Type=UK
Chan Usage=Switch/Switch
My Num A=
My Num B=
SPID 1=N/A
SPID 2=N/A
Data Usage=A
Phone 1 Usage=None
Phone 2 Usage=None
Phone Num Binding=N/A
My Name=<login name>
My Addr=(his local IP address - I've suggested he make it 192.168. ...)
Rem Name=nwnet
Rem Addr=(address/subnet of our MAX)
Dial #=(our ISDN number)
Route=IP
NAT Routing=NO
NAT Profile=N/A
Thanks!!
- Pete.
Peter Leigh <pete@nwnet.co.uk>
(+44) (0)161 950 7779
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>>
</PRE>
<!--X-MsgBody-End-->
<!--X-Follow-Ups-->
<HR>
<STRONG>Follow-Ups</STRONG>:
<UL>
<LI><STRONG><A HREF="msg09754.html">RE: (ASCEND) P75 -> Max : CL OK c=47?</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Peter Leigh <pete@nwnet.co.uk></LI>
</UL>
<LI><STRONG><A HREF="msg09709.html">Re: (ASCEND) P75 -> Max : CL OK c=47?</A></STRONG></LI>
<UL>
<LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI>
</UL>
</UL>
<!--X-Follow-Ups-End-->
<!--X-References-->
<!--X-References-End-->
<!--X-BotPNI-->
<HR>
<UL>
<LI>Prev by Date:
<STRONG><A HREF="msg09578.html">Re: (ASCEND) ok, color me perplexed</A></STRONG>
</LI>
<LI>Next by Date:
<STRONG><A HREF="msg09576.html">Re: (ASCEND) Patches?</A></STRONG>
</LI>
<LI>Prev by thread:
<STRONG><A HREF="msg09575.html">(ASCEND) RE: Can't Get 56kbps connect speeds on MAX 4060</A></STRONG>
</LI>
<LI>Next by thread:
<STRONG><A HREF="msg09709.html">Re: (ASCEND) P75 -> Max : CL OK c=47?</A></STRONG>
</LI>
<LI>Index(es):
<UL>
<LI><A HREF="mail18.html#09577"><STRONG>Main</STRONG></A></LI>
<LI><A HREF="thrd199.html#09577"><STRONG>Thread</STRONG></A></LI>
</UL>
</LI>
</UL>
<!--X-BotPNI-End-->
<!--X-User-Footer-->
<!--X-User-Footer-End-->
</BODY>
</HTML>