Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 5.1A for the Pipelines
Kevin Smith wrote:
>
> At 09:49 AM 9/10/97 -0700, Robert Dirksen wrote:
> >Hi Kevin
> >
> >Thanks for the information about 5.1A. Is this version also applicable
> >for Pipe 50 in Europe, or to more precise in the Netherlands. I currently
>
> Yes. It supports all versions within the guidelines of the release notes.
>
> >use AT&T/P-T-P as swithchtype which works fine, so if 5.1A does not
> >include NET-3 I don't care.
> >model P50-1SBRI-E
> >p/n 0710-0260-001
> >s/n 7186027
> >date 6/96
>
> This is one of the "older" P50s (a relative term), so is not upgradeable to
> a P75 as the "newer" ones are....
>
> >Exept for connection from my home to my IPX net in the office, I want to
> >use the Pipes for connection to my ISP who is using Cisco IOS routers.
> >They work with dynamic IP addressing, and I should run NAT. Is 5.1A
> >supporting dynamic Ip addressing or is the answer in the FAQ about
> >dynamic addressing still valid?
>
> Dynamic IP is supported in 5.1A, which FAQ # do you refer to...so I can see
> if it needs to be updated..?
Sorry,
I referred to the Nealis FAQ question nr. 19 about dynamic IP addressing, but
this is not your responsability.
Thanks for the support.
>
> >Last but not least, How do I install 5.1A and how to save the 5.0 in case
> >I need to restore it.
>
> Upgrade instructions are included in the release notes. If you have a TFTP
> server available locally, it makes things much easier....or XMODEM via the
> serial port. Let me know if you can't find and/or understand the instructions.
>
> 5.0A is available also on the FTP server:
>
> ftp://ftp.ascend.com/pub/Software-Releases/Pipeline/Release-5.0A
>
> Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: