Re: (ASCEND) RE: Pipeline upgrade problem

[Bob K <melange@yip.org>]

On Tue, 1 Dec 1998, ptran wrote:

> Hi Scott,
> 
> THANK YOU very much for your help.  The information you provided was very
> helpful.
> I shorted out jumper (P1) and was able to clear the flash with a command
> "EF" like you mentioned but I'm unable to download the new code with a
> command "DF" because I believe that the P75 code is the "fat" binary and it
> must be loaded by using tload.  I have been trying to contact Ascend tech
> support but still unable to talk to a live person.  Any help from you and
> members from this mailing list is appreciated.  THANKS.

There should normally be a small restricted load (starts with an r, ie
rbi.p50) that can be uploaded to the Pipe with xmodem-1k (aka ymodem, it
seems).  Failing that, you could upload a thin load and then use tftp to
load the fat one...

melange@yip.org - For external use only.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>