Re: (ASCEND) Novell Routing and P75

["Danny Williams" <Danny@ctrust.com>]

> Anyone experienced stuck blue screen for Windows 95 or Windows 98
> using the Novell or MS 32 bit client for Netware?  Sometimes never gets to
> the login screen.  Any thoughts?  I have put in the FFFFFE default route.

If you mean the "cloud" startup screen; then yes, I have been 
dealing with this since the first time I set up a remote computer 
with no server on site. 

I am using Client32v2.50 to connect a single remote computer via a 
pair of Pipe 75s to a Netware 4.11 server at the central office. 
Bootup routine is like this; Power on computer. Line comes up, 
computer halts at clouds, line drops from timeout. Ctrl-Alt-Del, 
select safe mode. Start, Restart. Repeat until eventually I get a 
Client32 login. Thereafter all IP and IPX apps work very well, so I 
expect routing tables and such are all OK.

Had the same problem with Client32 2.2. Tried dial query on and 
off, no difference. Both P75s are running 5.1ap8, widely considered 
the most stable rev in existance.

The line also tends to stay up, even when the computer is off, 
leading to some loooong uptimes.

Hopefully you will find a clue here somewhere that will help. I've 
resigned myself to either booting with the network wire out (and 
thus having IP but no Netware services available) or exercising 
these three fingers.

Danny Williams
Caldwell Trust Company
Venice, Florida   USA
mailto:danny@ctrust.com
http://www.ctrust.com
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>