Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Static IP with Max4004 and RADIUS Auth
The connection profile name is the Username. The username is used
to assign the IP address to the dialup computer. (The dial-up computer
may already know the address. That is OK.)
What are you using for authentication? PAP, CHAP, ...
Does this help?
Steve LaDuke
-----Original Message-----
From: Michelle Morris [mailto:morrism@cei.net]
Sent: Thursday, July 09, 1998 12:45 PM
To: Steve LaDuke
Cc: ascend-users
Subject: Re: (ASCEND) Static IP with Max4004 and RADIUS Auth
Right now he dials to the max box to connect and I don't know how to
associate his dialin to the connection profile. He should have the IP
address on his box so does that prompt the max box to see the connection
profile?
Michelle
Steve LaDuke wrote:
> If you created a connection profile for the user, you
> don't have to create a radius entry.
>
> The opposite also applies. You could create a radius
> entry and no connection profile.
>
> Have you tested it? Is there a problem?
>
> Steve LaDuke
>
> -----Original Message-----
> From: Michelle Morris [mailto:morrism@cei.net]
> Sent: Thursday, July 09, 1998 9:21 AM
> To: ascend-users
> Subject: (ASCEND) Static IP with Max4004 and RADIUS Auth
>
> Help. I have a user we assigned a Static IP to. When he dials up the
> max, I want him to have the static IP so that his network is online.
He
> is dialing in on a Linux box which acts as his gateway. I have added
an
> entry to the ethernet->mod config->connections menu, but don't know
> where else to do it. Do I need to add something to the radius file?
>
> TIA,
> --
> Michelle Morris
> ...
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>