Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) Making Shotgun work

Yes. 

It seems to work for MPP and PPP.

Larry Rosenman

-- 
Larry Rosenman, Sr. System Administrator, CyberRamp Internet Services
E-Mail: ler@cyberramp.net, http://www.cyberramp.net
Voice: (214) 343-3333/(817) 461-8484 (Metro)/Fax: (214) 343-3727
Technical Support: (214) 340-2020/(817) 226-2020 (Metro)
U.S. Mail: 11350 Hillguard Rd, Dallas, TX  75243-8311  

-----Original Message-----
From: David S. Langlands [mailto:dsl@uss.net]
Sent: Friday, July 10, 1998 3:39 PM
To: Larry Rosenman-CyberRamp System Administration
Cc: ascend-users@bungi.com
Subject: Re: (ASCEND) Making Shotgun work


Speaking of which =)

is there a way to limit 64K ISDN customers to 1 channel
when they use PPP or MP?  I assume this would be the setting:

...
        Ascend-Maximum-Channels = 2
	...
	....

The manuals seem to imply that the Ascend-Maximum-Channels
setting only works with MPP.  We've been policing this
manually and through accounting, and that seems to be
a bit of a waste.

Thanks for your help!

Dave Langlands
--
David S. Langlands      Chief Technologist      USS .net
dsl@uss.net             (312)655-1900           http://www.uss.net


Larry Rosenman-CyberRamp System Administration wrote:
> 
> I've set them up with MPP, and Ascend-Maximum-Channels=2.
> 
> (on Maxes, 6.1.x).
> 
> Larry Rosenman
> 
> Here is a RADIUS entry that works:
> username  Password = "UNIX"
>         User-Service = Framed-User,
>         Framed-Protocol = MPP,
>         Framed-Routing = None,
>         Framed-Address = 255.255.255.254,
>         Framed-Netmask = 255.255.255.255,
>         Framed-MTU = 1500,
>         Ascend-Idle-Limit = 2100,
>         Framed-Compression = Van-Jacobsen-TCP-IP,
>         Ascend-TS-Idle-Limit = 2100,
>         Ascend-TS-Idle-Mode = TS-Idle-Input-Output,
>         Ascend-Maximum-Channels = 2
> 
> --
> Larry Rosenman, Sr. System Administrator, CyberRamp Internet Services
> E-Mail: ler@cyberramp.net, http://www.cyberramp.net
> Voice: (214) 343-3333/(817) 461-8484 (Metro)/Fax: (214) 343-3727
> Technical Support: (214) 340-2020/(817) 226-2020 (Metro)
> U.S. Mail: 11350 Hillguard Rd, Dallas, TX  75243-8311
> 
> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of David S. Langlands
> Sent: Friday, July 10, 1998 11:07 AM
> To: ascend-users@bungi.com
> Subject: Re: (ASCEND) Making Shotgun work
> 
> Jim and Tony,
> 
> according to the folks at Diamond, MP works with Analog modems
> on a TNT.  They claim that they are using TNT's with 2.x in
> their own office and it works fine.  I am waiting for my eval
> so I can test it with my TNT 2.1.3's.  I'll post my results
> when I can get 'em.
> 
> I've got both CT1's and PRI's, so I should be able to test
> Tony's problem too.  BTW -- the Shotgun uses MP, not MP+,
> correct?  Anyone know?
> 
> Regards,
> 
> Dave
> --
> David S. Langlands      Chief Technologist      USS .net
> dsl@uss.net             (312)655-1900           http://www.uss.net
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
Follow-Ups: References: