Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Making Shotgun work
Bear in mind that the encaps value in RADIUS will not mean much for calls
you answer. By the time you authenticate and go to RADIUS, the encaps details
have all been established (during LCP negotiation). That's why it makes no
difference here.
We *could* of course complicate everyones life by making it take effect after
authentication by re-doing LCP negotiations .... but I don't think it's worth
the extra work.
At 03:46 PM 7/10/98 -0500, Larry Rosenman-CyberRamp System Administration
wrote:
>Yes.
>
>It seems to work for MPP and PPP.
>
>Larry Rosenman
>
>--
>Larry Rosenman, Sr. System Administrator, CyberRamp Internet Services
>E-Mail: ler@cyberramp.net, http://www.cyberramp.net
>Voice: (214) 343-3333/(817) 461-8484 (Metro)/Fax: (214) 343-3727
>Technical Support: (214) 340-2020/(817) 226-2020 (Metro)
>U.S. Mail: 11350 Hillguard Rd, Dallas, TX 75243-8311
>
>-----Original Message-----
>From: David S. Langlands [mailto:dsl@uss.net]
>Sent: Friday, July 10, 1998 3:39 PM
>To: Larry Rosenman-CyberRamp System Administration
>Cc: ascend-users@bungi.com
>Subject: Re: (ASCEND) Making Shotgun work
>
>
>Speaking of which =)
>
>is there a way to limit 64K ISDN customers to 1 channel
>when they use PPP or MP? I assume this would be the setting:
>
>...
> Ascend-Maximum-Channels = 2
> ...
> ....
>
>The manuals seem to imply that the Ascend-Maximum-Channels
>setting only works with MPP. We've been policing this
>manually and through accounting, and that seems to be
>a bit of a waste.
>
>Thanks for your help!
>
>Dave Langlands
>--
>David S. Langlands Chief Technologist USS .net
>dsl@uss.net (312)655-1900 http://www.uss.net
>
>
>Larry Rosenman-CyberRamp System Administration wrote:
>>
>> I've set them up with MPP, and Ascend-Maximum-Channels=2.
>>
>> (on Maxes, 6.1.x).
>>
>> Larry Rosenman
>>
>> Here is a RADIUS entry that works:
>> username Password = "UNIX"
>> User-Service = Framed-User,
>> Framed-Protocol = MPP,
>> Framed-Routing = None,
>> Framed-Address = 255.255.255.254,
>> Framed-Netmask = 255.255.255.255,
>> Framed-MTU = 1500,
>> Ascend-Idle-Limit = 2100,
>> Framed-Compression = Van-Jacobsen-TCP-IP,
>> Ascend-TS-Idle-Limit = 2100,
>> Ascend-TS-Idle-Mode = TS-Idle-Input-Output,
>> Ascend-Maximum-Channels = 2
>>
>> --
>> Larry Rosenman, Sr. System Administrator, CyberRamp Internet Services
>> E-Mail: ler@cyberramp.net, http://www.cyberramp.net
>> Voice: (214) 343-3333/(817) 461-8484 (Metro)/Fax: (214) 343-3727
>> Technical Support: (214) 340-2020/(817) 226-2020 (Metro)
>> U.S. Mail: 11350 Hillguard Rd, Dallas, TX 75243-8311
>>
>> -----Original Message-----
>> From: owner-ascend-users@max.bungi.com
>> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of David S. Langlands
>> Sent: Friday, July 10, 1998 11:07 AM
>> To: ascend-users@bungi.com
>> Subject: Re: (ASCEND) Making Shotgun work
>>
>> Jim and Tony,
>>
>> according to the folks at Diamond, MP works with Analog modems
>> on a TNT. They claim that they are using TNT's with 2.x in
>> their own office and it works fine. I am waiting for my eval
>> so I can test it with my TNT 2.1.3's. I'll post my results
>> when I can get 'em.
>>
>> I've got both CT1's and PRI's, so I should be able to test
>> Tony's problem too. BTW -- the Shotgun uses MP, not MP+,
>> correct? Anyone know?
>>
>> Regards,
>>
>> Dave
>> --
>> David S. Langlands Chief Technologist USS .net
>> dsl@uss.net (312)655-1900 http://www.uss.net
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Kevin Smith Ascend Communications...
Customer Satisfaction ...where Network Solutions never end.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: