Re: (ASCEND) LAN problems with P50

[John Coy <jcoy@anc.net>]

I think you need to turn Proxy Mode=Off in the
Ethernet->Mod Config->Ether Options menu.

Try that and see if it works.

At 01:06 PM 2/6/00 +0100, you wrote:

>Hi,
>
>I had some strange problems at a dialup customer. He
>got a configured pipe 50 with official IP's from us. He
>is also using private addresses on his LAN at some
>WinNT machines. All machines with official IP's are
>working fine - but the workstations with privat IP's
>show a address conflict at bootup with the MAC address
>of the pipe 50. I tried to change the IP of the pipe
>and an other firware (first b2.p75 6.1.44, second b2.p75 6.0.13)
>without success. I solved the problem by replacing
>the router (the customer got a Bintec-XS). I'm able
>to reproduce the problem in our office LAN. Only
>plugging the pipe 50 in our hub - I got the same
>problems (we are not using private addresses, but
>other official IP's).
>I sent the config to the support of our Ascend dialer-
>he said the config is okay.
>
>What's wrong? I still have warranty to the pipe ....
>
>Kind regards,
>Thomas.
>
>--
>------------------------------------------------------------
>Thomas Krause                   Webmatic Kommunikations GmbH
>                                         Tel: +49 3461 336630
>------------------------------------------------------------
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:   <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>