Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) modemdiag output on 5.0Ap36
Where can one obtain that hex decoder?
Jason
On Mon, 1 Dec 1997, Kevin Smith wrote:
> At 02:51 PM 11/28/97 -0500, Chris A. Epler wrote:
> >I noticed something new (?) in the modemdiag output of 5.0Ap36, towards the
> >end there is a sequence of
> >
> >BEGIN<misc hex string>END
>
> <snip>
>
> >BEGINaa14ab14ac14ba0bb0bc0ca77cb67cc118da255ea255eb255fa110ga10gb255ha1hb0h
> c3hd0he0hf0hg0hh0hi0ia255ib255ic0ja0jb0jc0jd0ka1kb1kc0kd0ke0kf0kg0kh255ki255
> kj255kk0kl82la0lb0ma0mb42mc55na0nb0oa255ob255oc255pa12END
>
> The hex string bt. the BEGIN and END is the output of AT&V2 command.
> It gives you additional information such as Signal to Noise ratio,
> retrain requested by server, retrain requested by client, whether
> client is a USR modem, etc. Rockwell has a program to parse these
> results. It's free.
> Here is an example of the parsed output:
>
> Current Transmit Speed : 31200 bps
> Minimum Transmit Speed : 31200 bps
> Maximum Transmit Speed : 31200 bps
> Current Receive Speed : 28800 bps
> Minimum Receive Speed : 28800 bps
> Maximum Receive Speed : 28800 bps
> Error Correction Protocol : LAP-M
> Compression type : V.42bis
> Modulation : V.34
> Symbol Rate : 3429 baud
> Transmit Carrier Frequency : 1959 Hz
> Receive Carrier Frequency : 1959 Hz
> Last AGC Gain value : -12.000000 dB
> Minimum AGC Gain value : -12.000000 dB
> Maximum AGC Gain value : -12.000000 dB
> Transmit level : 10
> Transmit level reduction : 3
> Last EQM read : 13
> Minimum EQM value : FF
> Maximum EQM value : 00
> # of EQM hits : 0
> EQM Sum value : 0034A8
> Reserved : 0
> Reserved : 0
> SNR Ratio : 37.200000 dB
> Minimum SNR Ratio : 37.200000 dB
> Maximum SNR Ratio : 37.200000 dB
> # of Local Retrains : 0
> # of Remote Retrains : 0
> # of Local Rate Renegs : 0
> # of Remote Rate Renegs : 0
> Transmit Non-linear Encoding: YES
> Receive Non-linear Encoding : YES
> Transmit precoding : NO
> Receive precoding : YES
> Transmit Shaping : No
> Receive Shaping : Yes
> Trellis mapping : 64 state
> Pre-emphasis : Filter #0
> Upper band edge : 3825.000000
> Lower band edge : 150.000000
> Round trip delay : 3.207495 ms
> Info Sequence 0 : 21FF
> Highest Transmit State : 67
> Highest Receive State : 67
> Time connected : 0 Hours 0 Minutes 19 Seconds
> Auto gain amplitude : 0 dB
> Auto gain attenuation : 0 dB
> Maximum retransmissions : 1
> Total retransmissions : 0
> Disconnect Reason : Link Disconnect
> New Field in Q : 255
>
>
>
>
> Kevin
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: