Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) modemdiag output on 5.0Ap36

Sirs,

Where is this free software from rockwell to download?

Camilo 

----------
From: Kevin Smith <kevin@ascend.com>
To: ascend-users@bungi.com
Subject: Re: (ASCEND) modemdiag output on 5.0Ap36
Date: Monday, December 01, 1997 9:11 PM

At 02:51 PM 11/28/97 -0500, Chris A. Epler wrote:
>I noticed something new (?) in the modemdiag output of 5.0Ap36, towards
the
>end there is a sequence of
>
>BEGIN<misc hex string>END

<snip>

>BEGINaa14ab14ac14ba0bb0bc0ca77cb67cc118da255ea255eb255fa110ga10gb255ha1hb0h

c3hd0he0hf0hg0hh0hi0ia255ib255ic0ja0jb0jc0jd0ka1kb1kc0kd0ke0kf0kg0kh255ki255

kj255kk0kl82la0lb0ma0mb42mc55na0nb0oa255ob255oc255pa12END

The hex string bt. the BEGIN and END is the output of AT&V2 command.
It gives you additional information such as Signal to Noise ratio,
retrain requested by server, retrain requested by client, whether
client is a USR modem, etc. Rockwell has a program to parse these
results. It's free.
Here is an example of the parsed output:

Current Transmit Speed      : 31200 bps
Minimum Transmit Speed      : 31200 bps
Maximum Transmit Speed      : 31200 bps
Current Receive Speed       : 28800 bps
Minimum Receive Speed       : 28800 bps
Maximum Receive Speed       : 28800 bps
Error Correction Protocol   : LAP-M
Compression type            : V.42bis
Modulation                  : V.34
Symbol Rate                 : 3429 baud
Transmit Carrier Frequency  : 1959 Hz
Receive Carrier Frequency   : 1959 Hz
Last AGC Gain value         : -12.000000 dB
Minimum AGC Gain value      : -12.000000 dB
Maximum AGC Gain value      : -12.000000 dB
Transmit level              : 10
Transmit level reduction    : 3
Last EQM read               : 13
Minimum EQM value           : FF
Maximum EQM value           : 00
# of EQM hits               : 0
EQM Sum value               : 0034A8
Reserved                    : 0
Reserved                    : 0
SNR Ratio                   : 37.200000 dB
Minimum SNR Ratio           : 37.200000 dB
Maximum SNR Ratio           : 37.200000 dB
# of Local Retrains         : 0
# of Remote Retrains        : 0
# of Local Rate Renegs      : 0
# of Remote Rate Renegs     : 0
Transmit Non-linear Encoding: YES
Receive Non-linear Encoding : YES
Transmit precoding          : NO
Receive precoding           : YES
Transmit Shaping            : No
Receive Shaping             : Yes
Trellis mapping             : 64 state
Pre-emphasis                : Filter #0
Upper band edge             : 3825.000000
Lower band edge             : 150.000000
Round trip delay            : 3.207495 ms
Info Sequence 0             : 21FF
Highest Transmit State      : 67
Highest Receive State       : 67
Time connected              : 0 Hours 0 Minutes 19 Seconds
Auto gain amplitude         : 0 dB
Auto gain attenuation       : 0 dB
Maximum retransmissions     : 1
Total retransmissions       : 0
Disconnect Reason           : Link Disconnect
New Field in Q              : 255




Kevin


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>