Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) modemdiag output on 5.0Ap36
More curiously:
The 5.0Ap36 (MAX 400x, 1800, 2000, 200+) has been given to support. This
release contains the following corrections:
For the MAXs:
TR# Description
[snip]
Enhancements:
------------------------------------------------------------------------
No enhancements
Is this not an enhancement? The reason why I ask is because things like
this can either a) be useful, or b) break something unexpectedly that
the end user may be doing. Such as parsing output of commands
automatically, etc.
How can Ascend be sure that they are being complete in their release
notes?
Best regards,
David Van Allen - FASTNET(tm) / You Tools Corporation
dave@fast.net (888)321-FAST(3278) http://www.fast.net
FASTNET - Business and Personal Internet Solutions
> -----Original Message-----
> From: Jason Nealis [SMTP:nealis@babylon.erols.com]
> Sent: Tuesday, December 02, 1997 12:17 AM
> To: Kevin Smith
> Cc: ascend-users@bungi.com
> Subject: Re: (ASCEND) modemdiag output on 5.0Ap36
>
>
> Where can one obtain that hex decoder?
>
> Jason
>
>
> On Mon, 1 Dec 1997, Kevin Smith wrote:
>
> > At 02:51 PM 11/28/97 -0500, Chris A. Epler wrote:
> > >I noticed something new (?) in the modemdiag output of 5.0Ap36,
> towards the
> > >end there is a sequence of
> > >
> > >BEGIN<misc hex string>END
> >
> > <snip>
> >
> >
> >BEGINaa14ab14ac14ba0bb0bc0ca77cb67cc118da255ea255eb255fa110ga10gb255h
> a1hb0h
> >
> c3hd0he0hf0hg0hh0hi0ia255ib255ic0ja0jb0jc0jd0ka1kb1kc0kd0ke0kf0kg0kh25
> 5ki255
> > kj255kk0kl82la0lb0ma0mb42mc55na0nb0oa255ob255oc255pa12END
> >
> > The hex string bt. the BEGIN and END is the output of AT&V2 command.
> > It gives you additional information such as Signal to Noise ratio,
> > retrain requested by server, retrain requested by client, whether
> > client is a USR modem, etc. Rockwell has a program to parse these
> > results. It's free.
> > Here is an example of the parsed output:
> >
> > Current Transmit Speed : 31200 bps
> > Minimum Transmit Speed : 31200 bps
> > Maximum Transmit Speed : 31200 bps
> > Current Receive Speed : 28800 bps
> > Minimum Receive Speed : 28800 bps
> > Maximum Receive Speed : 28800 bps
> > Error Correction Protocol : LAP-M
> > Compression type : V.42bis
> > Modulation : V.34
> > Symbol Rate : 3429 baud
> > Transmit Carrier Frequency : 1959 Hz
> > Receive Carrier Frequency : 1959 Hz
> > Last AGC Gain value : -12.000000 dB
> > Minimum AGC Gain value : -12.000000 dB
> > Maximum AGC Gain value : -12.000000 dB
> > Transmit level : 10
> > Transmit level reduction : 3
> > Last EQM read : 13
> > Minimum EQM value : FF
> > Maximum EQM value : 00
> > # of EQM hits : 0
> > EQM Sum value : 0034A8
> > Reserved : 0
> > Reserved : 0
> > SNR Ratio : 37.200000 dB
> > Minimum SNR Ratio : 37.200000 dB
> > Maximum SNR Ratio : 37.200000 dB
> > # of Local Retrains : 0
> > # of Remote Retrains : 0
> > # of Local Rate Renegs : 0
> > # of Remote Rate Renegs : 0
> > Transmit Non-linear Encoding: YES
> > Receive Non-linear Encoding : YES
> > Transmit precoding : NO
> > Receive precoding : YES
> > Transmit Shaping : No
> > Receive Shaping : Yes
> > Trellis mapping : 64 state
> > Pre-emphasis : Filter #0
> > Upper band edge : 3825.000000
> > Lower band edge : 150.000000
> > Round trip delay : 3.207495 ms
> > Info Sequence 0 : 21FF
> > Highest Transmit State : 67
> > Highest Receive State : 67
> > Time connected : 0 Hours 0 Minutes 19 Seconds
> > Auto gain amplitude : 0 dB
> > Auto gain attenuation : 0 dB
> > Maximum retransmissions : 1
> > Total retransmissions : 0
> > Disconnect Reason : Link Disconnect
> > New Field in Q : 255
> >
> >
> >
> >
> > Kevin
> >
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to
> ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to
> ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: