Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max 5.0Ap36
In the orginal message he asked me to post the scripts I used to
perform the upgrade, They are written to use CMU's snmp package.
Jason Nealis
Erols Internet
On Tue, 2 Dec 1997, Matt Holdrege wrote:
> Yeah, but what does that have to do with CMU?
>
>
> At 05:35 PM 12/2/97 -0500, Jason Nealis wrote:
> >
> > You need to be running an incremental release to be able be able
> >to issue the SysRest snmp command. (This is for the NVRAM after
> >the tload codes are issued) From what I saw the sysreset.0 does
> >not exist on in patch tree.
> >
> > I'm sure that Ken Packert could clear this up. Ken?
> >
> >Jason Nealis
> >Director Internet Operations
> >Network Access
> >Erols Internet
> >
> >
> >On Tue, 2 Dec 1997, Matt Holdrege wrote:
> >
> >> At 09:38 AM 12/2/97 -0500, Jason Nealis wrote:
> >> >
> >> > Actually right now what I do it via SNMP, But I still have to telnet
> >> >to each box and do the nvram, Cause the SysReset variable is only
> >> >in the I branch (UGH COUGH COUGH DAMMIT), But once 6.0 comes up
> >> >you can use this upgrade as many boxes as needed but you need CMU's
> >> >SNMP installed to do it.
> >>
> >> Cough, Cough. CMU??? I'm pretty sure I tested this with Openview a while
> >> back. It should also work fine with Navis Access. Unless I'm missing
> >> something?
> >>
> >> Matt Holdrege http://www.ascend.com matt@ascend.com
> >>
> >
> >
> >
> >
> Matt Holdrege http://www.ascend.com matt@ascend.com
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: