Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 5.0Ai13
> New features in the MAX release:
>
> * RADVision extensions to V.25bis for DNIS
> * Personal Handy Phone Service (PHS) support (Japan only)
I just have to ask, What is Personal Handy Phone Service?
Jason Nealis
> * Limiting terminal server access per user
> * SNMP request authentication added
> * MAX returns to primary RADIUS server after timeout
> * Loopback support for IDSL card
> * Channel selection when MP+ or BACP adds bandwidth
> * RADIUS Accounting ATMP Notification
> * SNMP can help find which device a call is logged into
> * Firewall enhancements for the next release of SAM (Secure
> Access Manager)
> * Configure port for Syslog messages
> * USR Courier V.Everything modem available with MAX 200Plus
> * Megahertz CC1336 and XJ1336 modems available with MAX 200Plus
> * Call logging feature
> * SNMP write security disabled by default
> * TFTP checks for compatibility of downloaded files
> * RADIUS now reports modem transmission rate
>
>
> Problems corrected in the MAX release:
>
> TR 1783 RADIUS: CLID with dynamic IP and callback didn’t work.
> TR 2028 MAX 4000: Under heavy load, calls were not connecting
> completely.
> TR 2092 MAX 2000: Boot hung with V110 card installed.
> TR 2096 MAX 4000: Poisoning of dial-out routes didn’t work correctly.
> TR 2100 FR MTU/MRU calculation caused fragmentation problems.
> TR 2154 MAX 4000 using ARA reset - Fatal Error 2.
> TR 250008 Using MAXDial, M4000 used SPEECH Bearer Service for outgoing
> modem calls.
> TR 250026 ELSA Microlink x.75 TA session was disconnected and hung.
> TR 250038 MAX 4000 reset - Fatal Error 2.
>
>
>
> New features in the Pipeline release:
>
> * Add basic IP Security functionality to the router
> * SNMP request authentication added
> * SNMP can help find which device a call is logged into
> * Firewall enhancements for the next release of SAM (Secure Access Manager)
> * NAT for LAN feature allows IP addresses below 100.100.100.100
> * Configure port for Syslog messages
> * Spoof Adr parameter allows any subnet address and mask
> * SNMP write security disabled by default
> * TFTP checks for compatibility of downloaded files
>
>
> Problems corrected in the Pipeline release:
>
> TR 1848 P130 using Frame Relay, ISDN backup not triggered by IPX traffic. 56
> TR 2015 P130 UBRI L56 Nailed group changed to 3 after tloadcode.
>
> -- Patti
>
>
> Kevin Smith Updated Service and Support
> Ascend Communications Resources are now at:
> http://www.ascend.com/service
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
> or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.shore.net/~dreaming/ascend-faq>
or <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>
Follow-Ups:
References: