Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) P75 and X2



I use one of my ISDN numbers as an incoming fax number, and one as a
secondary voice line.  I really only use the ISDN for data.  I Have
noticed that if I'm making a call out on the ISDN, and a fax comes in,
there seems to be lots of bleedthrough on the line.  (I can hear the fax
tones through the phone.)  It seems that there isn't enough sheilding
inside the unit, as the analog lines coming out of the P75 are going in
opposite directions, and don't run next to each other at all.

On Wed, 28 May 1997, Ken Mandelberg wrote:
> 
> I wondered how well an X2 modem would work attached to the POTS port of
> a P75. My expectation was that with only 1 foot of analog (between
> the modem and the P75) it should do real well.
> 
> So I attached a USR sportster to my analog port and called the USR
> test line (888-877-9248). This was a pre-X2 sportster, but the idea 
> behind the test line is to test the line for X2 before you buy one.
> 
> Well, the short answer is that the USR test identified my line as
> marginal saying I should expect degraded performance. 
> 
> Whats wrong here? 

---
William C Bonner <wbonner@lgx.com>                 6110 E Mockingbird Ln
Home Fax: +1-214-692-9277 Voice: +1-214-692-9278   Suite 102-762
Work Fax: +1-214-989-9782 Voice: +1-214-989-9781   Dallas, TX 75214-2600

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.shore.net/~dreaming/ascend-faq>
or		<ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>


References: