Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Long resets on Max4k
Have the same problem on our Max4k. Rebooting the radius server seems to
do the trick! Running Ascend radius on Linux 2.0.29
Jimmy Martyniak
Sagelink Internet Service Providers
(609) 589-3036
http://www.sagelink.com
martynjc@sagelink.com
!
On Wed, 1 Oct 1997, Marc Newman wrote:
> My Max4k's seem to take an abnormally long time to come back to life after
> a reboot. There are several problems:
>
> 1. After a reboot of my server, the Maxes don't every re-establish with
> the radius server. They refuse calls, busy out lines, etc. Never seem to
> come back alive. Reboot fixes this.
>
> 2. I tried a secondary radius server, but once they moved over to the
> secondary they never returned to the primary.
>
> 3. After rebooting the Maxes, they come alive (on the net) in the normal
> time, but continue to reject calls for quite a while, like about 5
> minutes. The PRIs are up, the lines are all up, and they answer the
> calls, but they don't have the Radius info, so they refuse the calls. If
> I manually reload all from the Update Remote Config menu it does NOTHING.
> After about 5 minutes I get the syslog entries indicating that the Maxes
> are querying the Radius and they come back to life at that point.
>
> I am running 5.0Ap24 on all of them. This symptom has been exhibited
> since about 5.0Ap23, I don't think 5.0Ap16 did this (ANY of the above).
>
> Anyone else having similar experiences?
>
> Marc
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: