Re: (ASCEND) Re: T1 problems with Pipeline 130 and 5.1a

[Jim Howard <jhoward@lyceum.com>]

At 12:09 10/08/1997 -0700, Josh Beck wrote:
>> There are others who have successfully used 5.1A on the P130, so 4.6C may
not 
>> be the best way to go...:
>
>	We still haven't been able to use anything after 5.0A...

while we're all telling our war stories...
I was setting up a p130 a couple weeks ago, with release 5.0Ai16
(i've not been inclined to test other versions)

If I set 
        Nailed T1->Mod Config->FDL
to anything other than NONE and reset or power-cycle the router,
whether the T1 line was attached or not, 
it would continuously reboot itself until I _physically__removed_
the T1 CSU card from the pipeline's mainboard
(which allowed it to boot as a p50) and cleared the nvram

-Jim H
----
Jim Howard             Sr Network Engineer        Lyceum Internet
jhoward@lyceum.com     http://www.lyceum.com/     404.248.1733     

My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
Fingerprint: 7E8B E2BA 1314 2535 CB08  CFF9 119B 7CD3 2488 954D

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) Feature Requests and Ascend?
• Next by Date: Re: (ASCEND) ok, color me perplexed
• Prev by thread: RE: (ASCEND) Re: T1 problems with Pipeline 130 and 5.1a
• Next by thread: Re: (ASCEND) Re: T1 problems with Pipeline 130 and 5.1a
• Index(es):
  • Main
  • Thread