Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Q931 debug on Maxen?



I would also like to know this command I am using a Max4000

walter

thanks in advance



> From owner-ascend-users@max.bungi.com Mon Sep 22 11:12 EDT 1997
> From: "Gleb Gornostayev" <gleb@quarta.net>
> To: <ascend-users@max.bungi.com>
> Subject: (ASCEND) Q931 debug on Maxen?
> Date: Mon, 22 Sep 1997 16:59:39 +0400
> X-Priority: 3
> X-Msmail-Priority: Normal
> X-Mimeole: Produced By Microsoft MimeOLE Engine V4.71.1008.3
> 
> Hello, All!
> 
> I have a question about MAX4000, MAX2000 and so on. I need the following:
> the ability to see all the Q931 messages on D-channel in E1 DSLs. I need it
> for debug purposes, and also to debug the handshaking between Maxen and
> Telco switches. I tried to find the debug-mode command by using 'help
> ascend' command, but I didn't find the required command. The 'PriDisp <n>'
> gives me the hex codes of the D-channel, but I want to see the decoded Q931
> messages. Is this possible?
> Now I must use the very expensive E1 analysers to solve my problems, but
> every MAX uses the E1 DSL drivers to communicate with Telco switch. I think
> that there is a good reason for embedding the Q931 message decoder in Ascend
> firmware to help people in solving problems. (I already use the R2 debug
> commands to debug the R2 protocol, when I use installations with R2).
> 
> (As an example of the already solved problem I can demonstrate the ISDN BRI
> equipment of the different manufacturers. E.g. Asuscom ISDNLink and Intel
> Proshare can give me the detailed log of the D-channel activity, already
> decoded. But all this equipment works only on ISDN BRI subscriber lines, not
> PRI lines).
> 
> Thanx!
> 
> 
> 
> Gleb Gornostayev, Manager
> Quarta Networks, Inc., Moscow, Russia
> http://www.quarta.net
> Phone +7-(095)-234-0422
> Fax +7-(095)-234-4939
> 
> 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>