(ASCEND) Bug report: Modem calls using Perm/Switched

[Phillip Vandry <vandry@Mlink.NET>]

Hardware: MAX 1800 (I suspect it would happen on the 40xx too)
Software: problem confirmed to exist with both 6.1.0 and 6.1.7

Problem:

If a connection profile is set to:
   Telco Options...Call Type=Perm/Switched
   Telco Options...Data Svc=Modem

then the call will be placed as a voice call, but without using a modem
(i.e., the same as if Data Svc=Voice). This will obviously not work
unless the other end is expecting a data-over-voice call.

It can easily be seen that this is the case by noting that the call is
completed too quickly for a modem, and by watching the 20-000 Modem Stat
display. No modems show up in use while the call is active.

As soon as you set Call Type=Switched instead of Perm/Switched, the call
is able to complete correctly, using a modem.

-Phil
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) v6.1.3 and v6.1.7 questions.
• Next by Date: (ASCEND) Max 4xxx/6xxx and 6.1.7
• Prev by thread: Re: (ASCEND) Max 4xxx/6xxx and 6.1.7
• Next by thread: (ASCEND) Multilink PPP on TNT and Maxen...
• Index(es):
  • Main
  • Thread