Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) NAT
At 18:02 1998/08/18 -0500, kevin wrote:
>To get a profile to work with multi IP NAT, all you should need to do is
>add Ascend-DHCP-Maximum-Leases to the profile. Set it to the max number of
>IP's the pipeline should get. Then configure the pipeline for multi IP NAT.
I had tried setting this up before, but I didn't use that parameter,
maybe that was why it didn't work...
This is the profile I've got now, I'll try to test it later today:
#DHCP test
djchtest Password = "SecretStuffHere"
User-Service = Framed-User,
Framed-Protocol = MPP,
Ascend-Assign-IP-Pool = 1,
Ascend-DHCP-Reply = DHCP-Reply-Yes,
Ascend-DHCP-Pool-Number = 1,
Ascend-DHCP-Maximum-Leases = 10,
Ascend-Maximum-Channels = 2,
Ascend-Idle-Limit = 600
-Jim H
----
Jim Howard Sr Network Engineer Lyceum Internet
jhoward@lyceum.com http://www.lyceum.com/ 404.248.1733
My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>