Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Max -isdn-> Pipeline -ether-> Pipeline -isdn-> Pipeline
Howdy,
I'm having problems with the following routing situation:
3. 2. 1. 0.
Customer2 Customer1 Me --- Net
Pipe1 -\-----Max
Pipe3 ----- Pipe2 -/
In other words, Customer 2 is connected to Customer1 via an ISDN line,
which connects to another pipeline, and back to our max.
Customer2 has 206.51.30.224/27. The pipeline is ... .225
Customer1 has 207.216.59.128/27 We connect to his .129,
and the pipeline to customer 2 is .133
I have put a static route in my max as follows:
90-402 bits-atotech
x Name=bits-atotech
x Active=Yes
x Dest=206.51.30.224/27
x Gateway=207.216.59.129
x>Metric=1
x Preference=60
x Private=No
x Ospf-Cost=1
x LSA-type=ExternalType1
x NSSA-ASE7=N/A
x ASE-tag=c0000000
x Third-Party=No
The problem is that sometimes it works with a Metric of 1 for a few days,
and then gives up. IOW, the packets bounce off our max, and loop back to
the router. I switch the Metric to 2, and then it works for another day or
so. Then I change it back, etc etc etc. I'm using 6.0.2 software on the max.
Any clues available? I'm lost, and my customer is getting understandably
quite pissed.
Thanks
Rob
----
Robert Hof,
Head-Honcho-Type If at first you don't succeed, then
NETinc - The Internet People skydiving definitely isn't for you.
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>