Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) P75 NAT setup

Yes, this is the result of the wddialout from the diag. screen. It seems it
is broadcast packet. How should I setup my filter to filter it?

Thanks

Daniel

  Date: 01/01/1990.     Time: 00:01:30
Cause an attempt to place call to 3311635
WD_DIALOUT_DISP: chunk 2515EE type IP.
(task: 251790, time: 90.63) 229 octets @ 278F48
  [0000]: FF FF FF FF FF FF 00 A0 24 94 25 22 08 00 45 00
  [0010]: 00 E5 47 5F 00 00 80 11 60 DE CF E6 F8 FD CF E6
  [0020]: F8 FF 00 8A 00 8A 00 D1 96 E3 11 02 87 F0 CF E6
  [0030]: F8 FD 00 8A 00 BB 00 00 20 45 44 45 50 45 4E 46
  [0040]: 44 45 46 46 43 46 47 45 46 46 43 44 43 43 41 43
  [0050]: 41 43 41 43 41 43 41 43 41 00 20 45 4A 45 4F 44
  [0060]: 43 45 4F 45 46 46 45 43 41 43 41 43 41 43 41 43
  [0070]: 41 43 41 43 41 43 41 43 41 42 4E 00 FF 53 4D 42
  [0080]: 25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  [0090]: 00 00 00 00 00 00 00 00 00 00 00 00 11 00 00 21
  [00a0]: 00 00 00 00 00 00 00 00 00 E8 03 00 00 00 00 00
  [00b0]: 00 00 00 21 00 56 00 03 00 01 00 00 00 02 00 32
  [00c0]: 00 5C 4D 41 49 4C 53 4C 4F 54 5C 42 52 4F 57 53
  [00d0]: 45 00 01 00 80 FC 0A 00 43 4F 4D 53 45 52 56 45


At 12:23 PM 5/29/98 -0700, you wrote:
>If the workstations are running win95 or nt, you are probably seeing
>broadcast packets bringing up the link. You can do a "wddialout" command to
>see what packets are bringing up the link, then filter on those if they are
>broadcast packets.
>
>Mark
>
>At 02:21 PM 5/28/98 -0700, you wrote:
>>Hi folks,
>>
>>I am setting up a P75 using NAT to connect to our Max4004. It works fine
>>with MPP . However, the P75 will automatically bring up a connection even
>>though there is no request for it. I have tested it by just connecting the
>>P75 to a network hub with serveral workstations (they are turned on but
>>idle). The P75 will connect then disconnect (after the idle timeout) and
>>connect again and repeat the cycle. However, when I unplug the network
>>cable from the network hub to the P75, it will not connect. What should I
>>do? Is that something to do with packet filtering?
>>
>>While I was testing it, I connect it to our local LAN hub and when I turn
>>the "proxy mode" to "always", it crashes my local LAN stations. What
>>happens is on all other workstations, I got "arp info overwritten for
>>a.b.c.d by 0:2a:c:7b:ef:3a"
>>where the MAC address is the address of the P75. Once I turn it back to
>>"off", it is fine. Does anyone have this experience? (I am using NAT on the
>>P75)
>>Software 5.1A
>>
>>Daniel
>>
>>
>>++ Ascend Users Mailing List ++
>>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>>
>
>Mark R. Baker
>mark@solunet.com
>Phone: 888-449-5766 xt123
>Canada: 888-765-8638
>Fax:   407-676-0809
>
>We don't make network products,
>we make them work!
>
>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>