TCLUG Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TCLUG:2401] Setup help....



Try a warm boot from whatever other operating system you have instead of
turning the machine off and then booting to the linux boot disk.

<ctrl-Alt-Del> from NT/Windows95 with the linux bootdisk in the drive.

Or if possible use a slower setting for the scsi.

HTH
sandipan

C. Justus Gibson wrote:
> 
> Hello T.C. Linux users...
> 
> I am new to this mailing list and relatively new to linux. I currently have
> Linux loaded on a Dell Dimension 350 however I am having problems loading
> the Red Hat Linux 5.1 OS onto my Dell Dimension XPS 200 box.
> 
> After the initial boot disk is loaded, the install CD is placed in the
> drive. After I select to load from CD it just sits at the message "Scanning
> SCSI bus...". It appears as if the system does not recognise my adaptec 2940
> Ultra Wide adaptor.
> 
> Hitting Alt+F3 and Alt+F4 have provided me with the following messages...
> 
> SCSI: aborting command due to timout: pid9, scsi0, channel0, id6, lun0
> 
> <4>(scsi0:-1:-1:-1) Bad scbptr 16 during SELTO
> <4>(scsi0:-1:-1:-1) Referenced SCB 255 not valid during SELTO
> <4>             SCSISEQ = 0x5a SEQADDR = 0x7 SSTAT0 = 0x10 SSTAT1 = 0x8a
> 
> Any help would be appreciated...thank you in advance for your time.
> 
> -Justus
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: tclug-list-unsubscribe@listserv.real-time.com
> For additional commands, e-mail: tclug-list-help@listserv.real-time.com
> Try our website: http://tclug.real-time.com