Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) caller-id on POTS port of new P75
> When Pacbell first set up CLID for two of our 5ESS
> lines, we did not get time and date. After I had Pacbell check the CLID
> lines, I now get time and date in the setup message. This would imply that
> the telco must enable time and date when enabling CLID. If we do not get
> the time and date, we will send out zero's in those fields.
How can you tell if the telco if sending time of day? I haven't
figured out how to decipher bridis output. I see strings in ascii,
including the calling and called number as well as "NOISDNCALLING".
How do you intrerpret the characters greater than 0x7F? Ascii only
goes up to 0x7F. Can you point me to a reference for ISDN signalling
and protocol?
> Also, there is one more limitation on the current implentation of the CLID:
> CLID is not supported when EKTS=Yes.
What is "EKTS"? I didn't find that in the reference manual index and it
doesn't show up in my saved config, so I must be at the default if its a
settable parameter in a P75.
Since somebody mentioned the differences in NI-1 on DMS100 and 5ESS, I'll
point out that I'm using NI-1 on a 5ESS. Is there any other configuration
info that would help you diagnose the problem. I'll post my whole config
if you want me to.
> Also, we need to get a bridisplay of the setup message to determine if we
> are getting time and date.
Here is bridis output. I called my second b channel from another
phone, let it ring a few times and hung up. Syslog reported:
_____________________________________________________________________________
Oct 4 16:46:42 isdn-156.remote.gatech.edu ASCEND: slot 0 port 0, line 1, channel 1, Incoming Call, 7706339xxx <- "xxx" are mine
Oct 4 16:47:06 isdn-156.remote.gatech.edu ASCEND: call 25 CL 0K c=2 p=2
Oct 4 16:47:06 isdn-156.remote.gatech.edu ASCEND: slot 4 port 2, Call Refused
Oct 4 16:47:06 isdn-156.remote.gatech.edu ASCEND: slot 0 port 0, line 1, channel 1, Far End Hung Up, Cause code 016
_____________________________________________________________________________
This is what bridis showed at the same time:
_____________________________________________________________________________
BRI_RCV-0: (task: 1F3200, time: 535184.48) 98 octets @ 2806B4
[0000]: 02 FF 03 08 01 74 05 04 03 90 90 A2 18 01 89 1E
[0010]: 02 80 83 34 01 40 6C 0C 21 81 37 37 30 36 33 33
[0020]: 39 35 32 32 70 08 C1 34 34 37 31 33 34 30 95 2A
[0030]: 31 80 80 01 03 9E 05 46 72 6F 6D 20 8B 0C 37 37
[0040]: 30 20 36 33 33 2D 39 35 32 32 80 01 01 85 10 4E
[0050]: 6F 6E 2D 49 53 44 4E 20 63 61 6C 6C 69 6E 67 80
[0060]: 01 2B
BRI-XMIT-0: (task: 241650, time: 535184.51) 11 octets @ 2812EC
[0000]: 00 93 9E E0 08 01 F4 02 18 01 89
BRI_RCV-0: (task: 1F3200, time: 535184.53) 4 octets @ 280CD0
[0000]: 00 93 01 A0
BRI-XMIT-0: (task: 266310, time: 535184.54) 11 octets @ 2812EC
[0000]: 00 93 A0 E0 08 01 F4 01 18 01 89
BRI_RCV-0: (task: 1F3200, time: 535184.57) 4 octets @ 27CFB8
[0000]: 00 93 01 A2
BRI-XMIT-0: (task: 1F3200, time: 535191.11) 4 octets @ 2812EC
[0000]: 00 81 01 2D
BRI_RCV-0: (task: 1F3200, time: 535191.13) 4 octets @ 27D5D4
[0000]: 00 81 01 0B
BRI_RCV-0: (task: 266310, time: 535210.32) 19 octets @ 27DBF0
[0000]: 02 93 E0 A2 08 01 74 4D 08 02 82 90 95 2A 04 80
[0010]: 80 01 50
BRI-XMIT-0: (task: 25EA90, time: 535210.32) 8 octets @ 2812EC
[0000]: 00 93 A2 E2 08 01 F4 5A
BRI_RCV-0: (task: 1F3200, time: 535210.35) 4 octets @ 27E20C
[0000]: 00 93 01 A4
_____________________________________________________________________________
--
Earl Barfield -- Operations Department / Information Technology
Georgia Institute of Technology, Atlanta Georgia, 30332
Internet: Earl.Barfield@oit.gatech.edu earl@prism.gatech.edu
earl@fantasy.gatech.edu earl@oit.gatech.edu
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: