At 07:34 AM 10/7/97 -0700, Jesse Martinez wrote: >I'm runing OSPF with rip turned off. > > >East County Internet Services, Inc >-Jess- >CFO >System Admin > >On Mon, 6 Oct 1997, Kevin Smith wrote: > >> You didn't mention if you are using a routing protocol here to handle the >> dynamic updates that would be required to do this ? >> >> At 07:51 PM 10/6/97 -0700, Jesse Martinez wrote: >> >I have only one static route. The default route that points to my router. >> >Both maxes point to the same router. I heard something about an attribute >> >called ascend-if-address but when I tried that the p50 wouldn't route at >> >all. Any other suggestions. >> > >> > >> >East County Internet Services, Inc >> >-Jess- >> >CFO >> >System Admin >> > >> >On Mon, 6 Oct 1997, Kevin Smith wrote: >> > >> >> At 12:00 PM 10/4/97 -0700, Jesse Martinez wrote: >> >> >I have a user with a Pipeline 50. Not sure the rev of software he has. My >> >> >question is how do I set up radius to allow him to connect to either of >> >> >two maxes and route without problems. I gave him a subnet of 248 to use >> >> >and when he connect to the first max in a hunt group he's ok. If the call >> >> >hits the second max then he can't route. I've never configured a p50 so >> >> >I'm not sure of the settings on his side. Both maxes are in the same hunt >> >> >group. >> >> >> >> Whichever MAX picks up the RADIUS entry should start advertising the >> route to >> >> the P50 via a routing protocol (RIPv2 or OSPF). Do you have static routes >> >> setup that could be over-riding this ? >> >> >> >> >> >> Kevin >> >> >> >> >> >> ++ Ascend Users Mailing List ++ >> >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >> >> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> >> >> >> > >> >++ Ascend Users Mailing List ++ >> >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >> >To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> >> > >> >> Kevin >> >> >> ++ Ascend Users Mailing List ++ >> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >> To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> >> > >++ Ascend Users Mailing List ++ >To unsubscribe: send unsubscribe to ascend-users-request@bungi.com >To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> > Kevin ++ Ascend Users Mailing List ++ To unsubscribe: send unsubscribe to ascend-users-request@bungi.com To get FAQ'd: <<A HREF="http://www.nealis.net/ascend/faq">http://www.nealis.net/ascend/faq</A>> </PRE> <!--X-MsgBody-End--> <!--X-Follow-Ups--> <HR> <STRONG>Follow-Ups</STRONG>: <UL> <LI><STRONG><A HREF="msg09500.html">Re: (ASCEND) P50</A></STRONG></LI> <UL> <LI><EM>From</EM>: Jesse Martinez <jmartine@ecis.com></LI> </UL> </UL> <!--X-Follow-Ups-End--> <!--X-References--> <STRONG>References</STRONG>: <UL> <LI><STRONG><A HREF="msg09464.html">Re: (ASCEND) P50</A></STRONG></LI> <UL> <LI><EM>From</EM>: Kevin Smith <kevin@ascend.com></LI> </UL> <LI><STRONG><A HREF="msg09472.html">Re: (ASCEND) P50</A></STRONG></LI> <UL> <LI><EM>From</EM>: Jesse Martinez <jmartine@ecis.com></LI> </UL> </UL> <!--X-References-End--> <!--X-BotPNI--> <HR> <UL> <LI>Prev by Date: <STRONG><A HREF="msg09485.html">(ASCEND) USR V.42bis problem update</A></STRONG> </LI> <LI>Next by Date: <STRONG><A HREF="msg09482.html">(ASCEND) P50 connects to "bad" MAX, no it's not an HX ;)</A></STRONG> </LI> <LI>Prev by thread: <STRONG><A HREF="msg09472.html">Re: (ASCEND) P50</A></STRONG> </LI> <LI>Next by thread: <STRONG><A HREF="msg09500.html">Re: (ASCEND) P50</A></STRONG> </LI> <LI>Index(es): <UL> <LI><A HREF="mail22.html#09483"><STRONG>Main</STRONG></A></LI> <LI><A HREF="thrd193.html#09483"><STRONG>Thread</STRONG></A></LI> </UL> </LI> </UL> <!--X-BotPNI-End--> <!--X-User-Footer--> <!--X-User-Footer-End--> </BODY> </HTML>