RE: (ASCEND) p75 configuration

["Brooks, Fergus (London)" <brookfer@MLE.CO.UK>]

> Hi,
> 
> You may want to check what type of ISDN you have. New BT connections use
> the ETSI standard - They will say ISDN 2e on the NTU. The old ones say
> ISDN2.
> 
> In any case the Switch Type you should be using is NET 3. This will work
> for both old & new types of connections. The setting U.K. will only work
> for the old ones......
> 
> Also make sure that you have your ISDN number put into both nos. 1 & 2
> slots. This will help.
> 
> Hope this sorts you out......
> 
> 
> _____________________________________________   
>    Fergus Brooks
> Analyst - Data Highway Team
>    Merrill Lynch Europe plc   
> Tel:	 + 44 171 906 7961
> Fax:	 + 44 171 906 7808
> <mailto:fergus_brooks@ml.com>
> 
> 
> 
> 
> -----Original Message-----
> From:	Charles Winston [SMTP:mail@winston.prestel.co.uk]
> Sent:	Thursday, December 03, 1998 11:30 AM
> To:	ascend-users@max.bungi.com
> Subject:	(ASCEND) p75 configuration
> 
> I have just purchased an Ascend Pipeline 75 and Im having problems 
> getting it to work 
> correctly.
> 
> The software version is +6.1.0+
> 
> Firstly I cant get the WAN light to stop flashing although it is 
> connected to the ISDN line.
> VT100 connection shows X but changes to P if I dial the number.
> 
> I have followed all the instructions and setup the data as best I can.
> 
> I have only a Macintosh connected to the ethernet port via  a hub and its 
> set for TCP/IP
> I have also got the same problems with only a PC connected.
> 
> Any advice from other users would be much appreciated.
> 
> 
> Charles Winston
> 
> 
> ==============================
> 
> mail@winston.prestel.co.uk
> 
> TEL:  +44 141 571 9123
> FAX:  +44 141 571 9124
> ISDN: +44 141 571 0065
> 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>