Re: (ASCEND) DOV: 4048 call routing

[DiGennaro <frank@bigdog.fred.net>]

It may not help now, but you also need to do the following:
System -> Sys Config -> Sub-Adr=Routing

Frank 

On Thu, 10 Dec 1998, Joe Pautler wrote:

> 
> i was kind of surprised that i didn't get any replies to this
> question.  however, i did some more research on my own, and it
> seems that removing the modems completely has achieved the desired
> effect.
> 
> 
> Joe Pautler wrote:
> ]
> ]
> ]givens:      we have a max4048, using one PRI (23B+D), with all modems
> ]             disabled (in other words, it supports only ISDN users).
> ]	     there is only one phone number used to dial into the
> ]             PRI, and the last 4 digits are 5601.
> ]
> ]the problem: we want to allow DOV (data over voice..tollmizer...etc)
> ]             connections, in order to avoid ISDN data usage charges.
> ]	     however, as of now, a voice (tollmizer, etc) call results
> ]	     in a busy signal (presumably because the 4048 does not
> ]	     have anything to route the call to).  if i enable one
> ]	     of the modems, it will answer the call.  i currently
> ]	     have Ethernet -> Mod Config -> WAN Options -> Ans 1#=5601.
> ]	     changing that number to various other things (garbage)
> ]	     results in no change of the behavior of either voice
> ]	     or data calls.
> ]
> ]my theory:   the provider of our PRI is not providing us with DNIS
> ]	     information.  they "think" they are.
> ]
> ]my question: are there any other parameters/settings, other than the
> ]	     single one that i mentioned above, that i should 
> ] 	     check/change?
> ]
> ]thanks in advance for your time...
> 
> ___________________________________________________________________________
> Joe Pautler, E.I.T.                             University at Buffalo
> CIT/OSS Network Engineering                     224 Computing Center
> http://www.oss.buffalo.edu/~pautler             (716) 645-3536
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>