Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Pipeline 50 Q.



At 10:48 AM 10/5/97 EDT, Tim Basher wrote:
>> Connections->[name]->IP options->DownPreference=120
>> Connections->[name]->IP options->DownMetric=7
>> I've looked through the docs... but, it seems some of this isn't
documented.
>> What does DownPreference and DownMetric control in the Pipeline 50?
>
>Well, I looked through my documents and the release notes and could not
>find it either.  It sounds like someone needs to notify the technical
>writers they missed something.  [Yo! Kevin!]

Will do....if I don't find it either ;)

Your guesses are correct too...

>I can provide an educated guess that these are the Preference and Metric to
>use for the route when the connection is down (not connected).  It would
>appear that the default [up] Preference is 60 and the default DownPreference
>is 120.  The default [up] Metric is 1 and the default DownMetric is 7.
>
>> What does the 120 value mean? ...what does the 7 signify?
>
>Check the meaning of the Preference and Metric parameters in the Reference
>Manual for your Pipeline.
>
>The Preference is the "reliability" of the information associated with the
>route.  Routes learned from more reliable sources (or more desirable routes)
>have a lower preference (and are therefore more preferable).  Basically,
>if there is more than one source of information about a route (interface
>config, static route, RIP) the router will update the routing table with
>the information provided by the source whose preference is closer to zero.
>
>The Metric is the cost of using the link [in hops] - the higher the Metric,
>the higher the cost.  If there are two routes to the same destination, the
>packets will travel route with the lowest cost [Metric].
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>

Kevin


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


References: